Guo Haonan,Wang Chunxia*,Liu Hui.Effect of different sealing treatments on the corrosion resistance of zinc nickel phosphate films[J].Plating & Finishing,2024,(1):15-19.[doi:10.3969/j.issn.1001-3849.2024.01.003]
不同封闭处理对锌镍系磷化膜耐蚀性的影响
- Title:
- Effect of different sealing treatments on the corrosion resistance of zinc nickel phosphate films
- Keywords:
- phosphating film ; corrosion resistance ; sealing
- 分类号:
- TG172.8
- 文献标志码:
- A
- 摘要:
- 针对磷化膜表面具有多孔的结构，以 30CrMnSi 钢为基体材料，在经过锌 - 镍系磷化后分别浸入硅酸钠溶液、 671 乳液、市售 4210 封闭剂中进行封闭处理。实验采用电化学工作站、硫酸铜点滴测试、扫描电镜、接触角测量仪来分析封闭处理后的锌镍系磷化膜的形貌、耐蚀性和疏水性。实验结果表明：磷化后未进行封闭处理的磷化膜的膜层表面疏松多孔，这导致其耐蚀性、疏水性较差；硅酸钠封闭处理后，其膜层表面孔洞大多被有效填充且致密性也有明显提高，使磷化膜的耐蚀性略有提高，但其疏水性较差；而 4210 封闭和 671 封闭后，磷化膜表面被覆上一层薄膜，致使磷化膜的耐蚀性和疏水性都有明显提高。经过不同封闭处理后发现，采用 4210 封闭剂可使磷化膜表面覆上一层薄膜且孔洞能被有效填充，这使其耐蚀性及疏水性也较其他封闭处理后有明显改善。 3 种封闭处理都可以在一定程度上增强锌镍系磷化膜的耐腐蚀性能。
- Abstract:
- ： Due to the porous structure on the surface of the phosphating film ， 30CrMnSi steel is used as the base material ， and after zinc nickel phosphating ， 30CrMnSi steel is immersed in sodium silicate solution ， 671 lotion and commercial 4210 sealant for sealing treatment. The morphology ， corrosion resistance and hydrophobicity of zinc nickel phosphating film after sealing treatment were analyzed by electrochemical workstation ， copper （ II ） sulfate drop test ， scanning electron microscope and contact angle meter. The experimental results show that the surface of the phosphating film without sealing treatment is loose and porous ， which leads to poor corrosion resistance and hydrophobicity. After sodium silicate sealing treatment ， most of the holes on the surface of the film are effectively filled and the density is also significantly improved ， which slightly improves the corrosion resistance of the phosphating film ， but its hydrophobicity is poor. After sealing with 4210 and 671 ， the surface of the phosphating film is covered with a thin film ， which significantly improves the corrosion resistance and hydrophobicity of the phosphating film. After different sealing treatments ， it was found that using 4210 sealing agent can cover the surface of the phosphating film with a thin film and effectively fill the pores ， which significantly improves its corrosion resistance and hydrophobicity compared to other sealing treatments. All three sealing treatments can enhance the corrosion resistance of zinc nickel based phosphating films to a certain extent.
参考文献/References:
[1] 陈力 , 郑辉 , 刘东岳 , 等 . 镁合金表面锌系磷化膜及硅酸盐封闭工艺与性能 [J]. 电镀与精饰 , 2022, 44(3): 1-6.
[2] Li R X, Yu Q M, Yang C P, et al. Innovative cleaner production for steel phosphorization using Zn-Mn phosphating solution[J]. Journal of Cleaner Production, 2010, 18(10-11): 1040-1044.
[3] 路新瀛 , 王小双 , 李源晋 , 等 . 带轧皮钢筋的高温快速锌镍系磷化初步研究 [J]. 工业建筑 2015 年增刊 II, 2015, 45: 180-183.
[4] 白玉伟 , 陈锐 . 封闭处理对工程车用件磷化膜形貌和耐蚀性的影响 [J]. 电镀与精饰 , 2021, 43(3): 1-5.
[5] 董蓓 , 魏星 , 刘渊媛 , 等 . 磷化工艺对电镀锌预磷化板磷化膜质量的影响 [J]. 材料保护 , 2018, 51(12): 72-76.
[6] Debnath N C. Importance of surface preparation for cor?rosion protection of automobiles[J]. 表面工程材料与先进技术期刊 ( 英文 ), 2013, 3(1): 94-105.
[7] 牟世辉 . 锌锰系磷化膜硅烷封闭工艺研究 [J]. 电镀与精饰 , 2012, 34(7): 41-43, 46.
[8] 江茜 , 胡哲 , 黎冬瑛 , 等 . 镀锌层无铬封闭工艺研究 [J]. 电镀与涂饰 , 2014, 33(23): 1020-1023.
[9] 马永纯 , 徐敏 . 硅酸盐封闭对 45 钢锌锰系磷化膜耐蚀性的影响 [J]. 电镀与涂饰 , 2021, 40(11): 853-858.
[10] Dechoup S, Thaiwatthana S, Chairaungsri T. Post-treatment by sodium silicate after zinc phosphating on cold-rolled steel[J]. Chiang Mai Journal of Science, 2012, 39(1): 30-40.
[11] 张云霞 , 李亚娟 . 热水和硅酸钠封孔法对镁合金磷化膜耐蚀性的影响 [J]. 电镀与环保 , 2014, 34(2): 37-39.
[12] 林碧兰 , 卢锦堂 , 孔纲 . 硅酸钠封闭后处理对磷化热镀锌钢耐蚀性的影响 [J]. 腐蚀科学与防护技术 , 2008, 20(2): 114-117.
[13] Lin B L, Lu J T. Self-healing performance of composite coatings prepared by phosphating and cerium nitrate post-sealing[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2015, 30(4): 813-817.
[14] 冉黎 , 李杰 . 封闭处理对钢筋磷化膜耐蚀性的影响 [J]. 电镀与精饰 , 2023, 45(5): 34-40.
[15] 冯明海 , 耿晓菊 , 胡地荣 , 等 . 高温锰系磷化膜耐蚀性能测试方法研究 [J]. 信阳师范学院学报 ( 自然科学版 ), 2011, 24(3): 377-379.
[16] 中华人民共和国航空工业标准 . HB 5063-1996 钢铁零件磷化膜层质量检验 [S]. 北京 : 中国航空工业总公司三〇一研究所出版 ,1996.
[17] 邵红红 , 陈婷婷 , 祁昌洋 , 等 . 封闭处理对 316L 不锈钢超声场下磷化膜性能的影响 [J]. 中国表面工程 , 2017, 30(1): 63-69.
[18] 冯亮 . 铝合金表面硅烷化处理工艺及膜层性能研究 [D]. 秦皇岛 : 燕山大学 , 2015.
[19] 闫星宇 , 白术波 , 肖围 . 纳米 SiO 2 协同稀土铈对铝管表面硅烷膜的耐蚀性研究 [J]. 电镀与环保 , 2010, 30(3): 36-40.
[20] 王伟 , 张大伟 , 黄元申 , 等 . 亲水性 TiO 2 的研究进展 [J]. 激光杂志 , 2012, 33(2): 1-2.
相似文献/References:
[1]徐美玲,亢淑梅,陈婷婷,等.添加氯化铈对镁合金Ni?P化学镀镀层性能影响[J].电镀与精饰,2019,(1):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
XU Meiling,KANG Shumei,CHEN Tingting,et al.Properties of Electroless Plating Ni?P on Magnesium AlloySubstrate by Adding CeCl3[J].Plating & Finishing,2019,(1):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
[2]宿 辉,栾柏瑞.AZ91D镁合金表面无铬无氟前处理工艺研究[J].电镀与精饰,2019,(1):10.[doi:10.3969/j.issn.1001-3849.2019.01.003]
XU Hui,LUAN Bairui.Study on Chromium?Free and Fluorine?Free PretreatmentProcess of AZ91D Magnesium Alloy[J].Plating & Finishing,2019,(1):10.[doi:10.3969/j.issn.1001-3849.2019.01.003]
[3]刘军松,刘定富,苏 琪,等.有机添加剂对电镀Zn-Ni-P合金的影响[J].电镀与精饰,2019,(7):6.[doi:10.3969/j.issn.1001-3849.2019.07.002]
LIU Junsong,LIU Dingfu,SU Qi,et al.Effect of Organic Additives on Zn-Ni-P Alloy Electroplating[J].Plating & Finishing,2019,(1):6.[doi:10.3969/j.issn.1001-3849.2019.07.002]
[4]颜晨曦,宋娟娟,曹建平,等.全氢聚硅氮烷涂层制备及其性能[J].电镀与精饰,2019,(7):14.[doi:10.3969/j.issn.1001-3849.2019.07.004]
YAN Chenxi,SONG Juanjuan,CAO Jianping,et al.Preparation and Properties of Perhydropolysilazane Coating[J].Plating & Finishing,2019,(1):14.[doi:10.3969/j.issn.1001-3849.2019.07.004]
[5]姚知深,牛宗伟*,刘 斌,等.超声振动对65钢电解磷化膜表面形貌与耐蚀性的影响[J].电镀与精饰,2019,(9):24.[doi:10.3969/j.issn.1001-3849.2019.09.005]
YAO Zhishen,NIU Zongwei*,LIU Bin,et al.Effect of Ultrasonic Vibration on Surface Morphology and Corrosion Resistance of 65 Steel Electrolytic Phosphating Film[J].Plating & Finishing,2019,(1):24.[doi:10.3969/j.issn.1001-3849.2019.09.005]
[6]李佳霖,郝建军,牟世辉.Fe2+对镁合金电化学磷化改性研究[J].电镀与精饰,2019,(10):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
LI Jialin,HAO Jianjun,MOU Shihui.Study on Electrochemical Phosphating Modification of Magnesium Alloy by Fe2+[J].Plating & Finishing,2019,(1):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
[7]雷同鑫,鞠 辉,张长科,等.电镀Ni-W-P合金在钻杆接头上的应用[J].电镀与精饰,2019,(10):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
LEI Tongxin,JU Hui,ZHANG Changke,et al.Application of Ni-W-P Alloy Prepared by Electroplating to Tool Joints[J].Plating & Finishing,2019,(1):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
[8]贾启华,许晓娟*.沉积时间对镁合金化学镀镍的影响[J].电镀与精饰,2019,(12):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
JIA Qihua,XU Xiaojuan*.Effect of Deposition Time on Direct Electroless Plating of Magnesium Alloys[J].Plating & Finishing,2019,(1):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
[9]李 博*,赵金航,肖细军.电镀锌-镍合金替代镀镉、镀镉-钛工艺研究[J].电镀与精饰,2020,(3):43.[doi:10.3969/j.issn.1001-3849.2020.03.009]
LI Bo*,ZHAO Jinhang,XIAO Xijun.Process Research on Electroplating of Zinc-Nickel Alloy Instead of Cadmium Plating and Cadmium-Titanium Plating[J].Plating & Finishing,2020,(1):43.[doi:10.3969/j.issn.1001-3849.2020.03.009]
[10]黄章崎,石海明,朱惠文,等.可溶性镍阳极对电镀镍性能的影响[J].电镀与精饰,2020,(6):1.[doi:10.3969/j.issn.1001-3849.2020.06.0010]
HUANG Zhangqi,SHI Haiming,ZHU Huiwen,et al.Effect of Soluble Nickel Anode on the Performance of Electroplated Nickel[J].Plating & Finishing,2020,(1):1.[doi:10.3969/j.issn.1001-3849.2020.06.0010]
[11]周艳丽.电器件支架低温锌系磷化工艺研究[J].电镀与精饰,2021,(4):20.[doi:10.3969/j.issn.1001-3849.2021.04.005]
ZHOU Yanli.Research on Low-temperature Zinc Phosphating Process of Electrical Parts Support[J].Plating & Finishing,2021,(1):20.[doi:10.3969/j.issn.1001-3849.2021.04.005]
[12]李继伟*,杨振宇,翟欢乐.钢结构连接螺栓锰系磷化及磷化膜的耐蚀性[J].电镀与精饰,2022,(1):50.[doi:10.3969/j.issn.1001-3849.2022.01.009]
LI Jiwei*,YANG Zhenyu,ZHAI Huanle.Manganese Phosphating of Steel Structure Connecting Bolt and Corrosion Resistance of Phosphating Film[J].Plating & Finishing,2022,(1):50.[doi:10.3969/j.issn.1001-3849.2022.01.009]
[13]吕 芳,谷 娜*.化工管道连接法兰磷化工艺条件优化及磷化膜的耐蚀性[J].电镀与精饰,2022,(3):59.[doi:10.3969/j.issn.1001-3849.2022.03.011]
LYU Fang,GU Na *.Optimization of Phosphating Process Conditions for Chemical Pipe Connection Flange and Corrosion Resistance of Phosphating Film[J].Plating & Finishing,2022,(1):59.[doi:10.3969/j.issn.1001-3849.2022.03.011]
[14]张伟华*,张颖超,孙 伟,等.柠檬酸对建筑用16Mn钢磷化膜物相与耐蚀性的影响[J].电镀与精饰,2022,(6):21.[doi:10.3969/j.issn.1001-3849.2022.06.005]
ZHANG Weihua*,ZHANG Yingchao,SUN Wei,et al.Effect of Citric Acid on Phase and Corrosion Resistance of Phosphating Films on 16Mn Steel for Construction[J].Plating & Finishing,2022,(1):21.[doi:10.3969/j.issn.1001-3849.2022.06.005]
[15]颜晨曦 *,郝玉林,蔡 宁,等.酸洗汽车用钢磷化机理探讨及其质量评价[J].电镀与精饰,2022,(11):29.[doi:10.3969/j.issn.1001-3849.2022.11.006]
YAN Chenxi *,HAO Yulin,CAI Ning,et al.Discussion on Phosphating Mechanism and Quality Evaluation of Pickling Automobile Steel[J].Plating & Finishing,2022,(1):29.[doi:10.3969/j.issn.1001-3849.2022.11.006]
[16]冉 黎,李 杰*.封闭处理对钢筋磷化膜耐蚀性的影响[J].电镀与精饰,2023,(5):34.[doi:10.3969/j.issn.1001-3849.2023.05.005]
Ran Li,Li Jie*.Effect of sealing treatment on corrosion resistance of phosphating film on rebar[J].Plating & Finishing,2023,(1):34.[doi:10.3969/j.issn.1001-3849.2023.05.005]
备注/Memo
收稿日期： 2023-07-07 修回日期： 2023-07-20 作者简介： 郭浩男（ 1999 ―），男，硕士研究生， email ： 654126927@qq.com * 通信作者： 王春霞，女，硕士，高级工程师，研究方向：电镀、阳极氧化等， email ： wcx95@163.com?/html>