HUANG Zhangqi,SHI Haiming,ZHU Huiwen,et al.Effect of Soluble Nickel Anode on the Performance of Electroplated Nickel[J].Plating & Finishing,2020,(6):1-7.[doi:10.3969/j.issn.1001-3849.2020.06.0010]
可溶性镍阳极对电镀镍性能的影响
- Title:
- Effect of Soluble Nickel Anode on the Performance of Electroplated Nickel
- 文献标志码:
- A
- 摘要:
- 针对高纯镍阳极连续电解后，杂质元素（Fe、Zn、Cu、Cr）累积影响镀液与镀层质量的问题，采用3种高纯镍阳极材料连续溶解30 d，以模拟工业电镀进程的方法，研究了杂质元素对镀液与镀层质量的影响。通过赫尔槽实验、条形阴极法、中性盐雾实验等方法测试了8 d、30 d时镀液的电流效率、分散能力等性能，分析了8 d、30 d时镀液获取的镀层的外观、内应力和耐蚀性。结果表明，采用高纯度可溶性镍阳极，连续电解8 d，镀液与镀层性能未见明显改变；但电解至30 d时，镀层麻点增多，内应力增大、耐蚀性下降。国内外品牌对比发现，使用国内品牌1电解30 d时，镀液的铬杂质含量是最少的，为0.001 mg·L-1，而国外品牌3电解30 d时，镀液的铁杂质含量是最少的，为0.090 mg·L-1。镀层的微观形貌表明，对30 d的镀液进行“电解和循环过滤”后，能够有效提高镀液性能和镀层的质量。
- Abstract:
- In order to solve the problem that impurity elements (Fe, Zn, Cu, Cr) accumulate and affect the quality of plating solution and coating after continuous electrolysis of high-purity nickel anode, three kinds of high-purity nickel anode materials were dissolved continuously for 30 days to simulate the process of industrial electroplating, and the effect of impurity elements on the quality of plating solution and coating was studied. Through Hull cell experiment, strip cathode method, neutral salt spray experiment and other methods, the current efficiency, dispersion ability and other properties of the plating solution were tested at 8 d and 30 d, and the appearance, internal stress and corrosion resistance of the coating obtained at 8 d and 30 d were analyzed. The results show that the properties of the solution and coating have no obvious change after 8 days of continuous electrolysis with high purity soluble nickel anode, but after 30 days of electrolysis, the pitting of the coating increases, the internal stress increases and the corrosion resistance decreases. Compared with domestic and foreign brands, it is found that the chromium impurity content of the plating solution is the least (0.001 mg·L-1) when using domestic brand one electrolysis for 30 days, while the iron impurity content of the plating solution is the least (0.090 mg·L-1) when using foreign brand three electrolysis for 30 days. The coating morphology shows that the performance of the solution and the quality of the coating can be effectively improved after electrolysis and circulation filtration.
参考文献/References:
[1] 欧阳小琴, 周琳燕, 余斌, 等. 镍基合金镀层的研究现状[J]. 电镀与精饰, 2014, 36(7): 20-24.
Ouyang X Q, Zhou L Y, Yu B, et al. Research status of nickel-based alloy coatings[J]. Electroplating and Finishing, 2014, 36 (7): 20-24 (in Chinese).
[2] 张勃. 氨基磺酸盐镀镍的阳极行为及其对镀层性能的影响[J]. 腐蚀与防护, 2008, 29(6):322-325.
Zhang B. Anode behavior of sulfamate nickel plating and its effect on coating performance[J]. Corrosion and Protection, 2008, 29 (6): 322-325 (in Chinese).
[3] 戈学忠, 邢家永, 王素玲. 电解法制取圆形镍饼[J]. 有色金属(冶炼部分), 1982,(1):60.
Ge X Z, Xing J Y, Wang S L. Round nickel cakes produced by electrolysis[J]. Nonferrous Metals (Smelting Section), 1982, (1): 60(in Chinese).
[4] 全国有色金属标准化技术委员会. GB/T6516-2010电解镍[S]. 北京:中国标准出版社, 2010.
[5] 李松. 电沉积纳米结构镍钴合金的制备及性能研究[D]. 吉林: 吉林大学, 2018.
[6] 《电镀手册》编写组. 电镀手册.上册[M]. 北京:国防工业出版社, 1977.
[7] 全国金属与非金属覆盖层标准化技术委员会. JB/T7704.4-1995 电镀溶液试验方法 分散能力试验 [S]. 湖北: 中国机械工业部, 1996.
[8] 全国金属与非金属覆盖层标准化技术委员会. GB/T 6461-2002 金属基体上金属和其他无机覆盖层经腐蚀试验后的试样和试件的评级 [S]. 北京: 中国标准出版社, 2002.
[9] 刘仁志. 影响镀镍层内应力的因素及排除方法[J]. 印制电路信息, 2003, (5):33-34.
Liu R Z. Factors affecting the internal stress of nickel plating layer and removal methods[J]. Information on Printed Circuits, 2003, (5): 33-34 (in Chinese).
[10] 胡维, 王春霞, 周佑明, 等. 工艺条件及镀液杂质对瓦特镍镀层内应力的影响[J]. 电镀与精饰, 2016,(4):26-28.
Hu W, Wang C X, Zhou Y M, et al. Effect of process conditions and impurities in plating solution on the internal stress of Watt nickel plating[J]. Plating and Finishing, 2016, (4): 26-28 (in Chinese).
相似文献/References:
[1]王晓丽,顾海,赵紫怡,等.电沉积金属基复合镀层制备研究进展[J].电镀与精饰,2021,(8):44.[doi:10.3969/j.issn.1001-3849.2021.08.010]
WANG Xiaoli,GU Hai,ZHAO Ziyi,et al.Research Progress of Fabricating Metal-Matrix Composite Coating by Electrodeposition[J].Plating & Finishing,2021,(6):44.[doi:10.3969/j.issn.1001-3849.2021.08.010]
[2]卢建波*,解雁冰,韩漫漫,等. 镍阳极中S元素对电化学溶解性能的影响 [J].电镀与精饰,2022,(10):31.[doi:10.3969/j.issn.1001-3849.2022.10.005]
LU Jianbo*,XIE Yanbing,HAN Manman,et al.Effect of S Element in Nickel Anode on Electrochemical Dissolution Performance[J].Plating & Finishing,2022,(6):31.[doi:10.3969/j.issn.1001-3849.2022.10.005]
备注/Memo
收稿日期： 2019-11-04；修回日期： 2020-02-12
通信作者： 王春霞，email：wcx95@163.com
基金项目： 校企合作项目（Hk201801112）