WANG Xiaoli,GU Hai,ZHAO Ziyi,et al.Research Progress of Fabricating Metal-Matrix Composite Coating by Electrodeposition[J].Plating & Finishing,2021,(8):44-47.[doi:10.3969/j.issn.1001-3849.2021.08.010]
电沉积金属基复合镀层制备研究进展
- Title:
- Research Progress of Fabricating Metal-Matrix Composite Coating by Electrodeposition
- 文献标志码:
- A
- 摘要:
- 金属基复合镀层广泛应用于微型刀具、内燃机气缸内壁、牙医钻头、活塞环镀层等方面。本文介绍了金属基复合镀层的电沉积制备方法，从沉积装置、颗粒分散、镀层均匀性以及镀层结合性等方面进行了探讨。分析了平板式、旋转式槽镀复合电沉积和不循环式、循环式喷流电沉积的特点和研究现状，在减小颗粒团聚、提升镀层颗粒含量和镀层结合性等方面给出了参考方法。
- Abstract:
- Metal-based composite coatings were widely used in micro-tools, internal combustion engine cylinder walls, dentist bits, piston ring coatings, etc. In this paper, the electrodeposition method of metal matrix composite coating was introduced from the the deposition equipment, particle dispersion, coating uniformity and coating bondability. The characteristics and research status of flat-plate and rotating cylindrical electrode composite electrodeposition, and non-circular and circulating jet electrodeposition were analyzed. In addition, some suggestions in terms of reducing particle agglomeration, improving the particle content in the coating and coating bonding were provided.
参考文献/References:
[1] Lessiak M, Haubner R. Diamond coatings on hardmetal substrates with CVD coatings as intermediate layers [J]. Surface and Coatings Technology, 2013, 230, 119-123.
[2] Wang C, Wang X, Sun F. Tribological behavior and cutting performance of monolayer, bilayer and multilayer diamond coated milling tools in machining of zirconia ceramics [J]. Surface and Coatings Technology, 2018, 353, 49-57.
[3] Wang H Y, Chou C C. Microstructure and mechanical properties of microdiamond-incorporated equimolar Al-Si-Ti-Zr composite oxide coatings on an aluminum bronze alloy synthesized by sol-gel technique[C]. TACT 2017 International Thin Films Conference, 2017.
[4] Wei Y Y, Li W P, Liu H C, et al. Effects of submicron diamonds on the growth of copper in Cu-diamond co-deposition[J]. International Journal of Minerals, Metallurgy, and Materials, 2012, 19(1): 72-76.
[5] Huang W, Zhao Y,Wang X. Preparing a high-particle-content Ni/diamond composite coating with strong abrasive ability[J]. Surface and Coatings Technology, 2013, 235, 489-494.
[6] He X, Wang Y, Xin S, et al. Preparation and investigation of Ni-diamond composite coatings by electrodeposition[J]. Nanoscience and Nanotechnology Letters, 2012, 4(1): 48-52.
[7] Pushpavanam M, Manikandan H, Ramanathan K. Preparation and characterization of nickel-cobalt-diamond electro-composites by sediment co-deposition[J]. Surface & Coatings Technology, 2007, 201, 6372-6379.
[8] Zhao K L, Shen L D, Qiu M, et al. Preparation and properties of nanocomposite coatings by pulsed current-jet electrodeposition[J]. International Journal of Electrochemical Science, 2017, 12(9): 8578-8590.
[9] Maharana H, Basu A. Evolution and structure-property correlation of CTAB assisted high hardness electrodeposited Cu-ZrO2 nano-cone arrays[J]. Surface and Coatings Technology, 2017, 310, 148-156.
[10] Kunieda M, Katoh R. Rapid prototyping by selective electrodeposition using electrolyte jet[J]. CIRP Annals, 1998, 47(1): 161-164.
[11] Tian Z J, Wang D S, Wang G F, et al. Microstructure and properties of nanocrystalline nickel coatings prepared by pulse jet electrodeposition[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(6): 1037-1042.
[12] Maurin G, Lavanant A. Electrodeposition of nickel/silicon carbide composite coatings on a rotating disc electrode[J]. Journal of Applied Electrochemistry, 1995, 25(12): 1113-1121.
[13] Chen L, Yu G, Chu Y. Effect of three types of surfactants on fabrication of Cu-coated graphite powders[J]. Advanced Powder Technology, 2013, 24(1): 281-287.
[14] 谭澄宇. Ni、Cu基复合镀层制备及其电化学基础研究[D]. 长沙:中南大学, 2008.
[15] Medelien V, Stankevi V, Bikulius G. The influence of artificial diamond additions on the formation and properties of an electroplated copper metal matrix coating[J]. Surface and Coatings Technology, 2003, 168(2-3): 161-168.
[16] Wang X L, Chou C C, Yang Y C, et al.Tribological and mechanical properties of Cu/Ni-microdiamond bilayers on brass substrates coated by composite electrodeposition technology[J]. Surface Topography: Metrology and Properties, 2020, 8(2): 024005.
[17] Wang X L, Chou C C, Lee J W, et al. Preparation and investigation of diamond-incorporated copper coatings on a brass substrate by composite electrodeposition[J]. Surface and Coatings Technology, 2020, 386, 125508.
[18] Chou M C, Yang H, Yeh S H. Microcomposite electroforming for LIGA technology[J]. Microsystem Technologies, 2001, 7, 36-39.
[19] Tudela I, Zhang Y, Pal M, et al. Ultrasound-assisted electrodeposition of nickel: Effect of ultrasonic power on the characteristics of thin coatings[J]. Surface and Coatings Technology, 2015, 264, 49-59.
[20] Shen L D, Zhao K L, Qiu M B, et al. Preparation and properties of nano-multilayer films by rotating jet electrodeposition[J]. International Journal of Electrochemical Science, 2018, 13(1): 984-993.
[21] Zhao Z, Du L, Zheng X, et al. Effects of ultrasonic agitation on adhesion strength of micro electroforming Ni layer on Cu substrate[J]. Ultrason Sonochem, 2016, 29, 1-10.
相似文献/References:
[1]张冰怡,张莎莎*,姚正军,等.电沉积Ni-W纳米晶镀层制备与显微硬度研究[J].电镀与精饰,2019,(8):20.[doi:10.3969/j.issn.1001-3849.2019.08.005]
ZHANG Bingyi,ZHANG Shasha*,YAO Zhengjun,et al.Preparation and Microhardness of Electrodeposited Ni-W Nanocrystalline Coatings[J].Plating & Finishing,2019,(8):20.[doi:10.3969/j.issn.1001-3849.2019.08.005]
[2]雷同鑫,鞠 辉,张长科,等.电镀Ni-W-P合金在钻杆接头上的应用[J].电镀与精饰,2019,(10):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
LEI Tongxin,JU Hui,ZHANG Changke,et al.Application of Ni-W-P Alloy Prepared by Electroplating to Tool Joints[J].Plating & Finishing,2019,(8):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
[3]李晓峰*,孟 芳,董会超,等.电沉积法制备掺铋金属锌及其性能表征[J].电镀与精饰,2020,(1):12.[doi:10.3969/j.issn.1001-3849.2020.01.003]
LI Xiaofeng*,MENG Fang,DONG Huichao,et al.Electrodeposited Preparation of Bi-Doped Metal Zinc and Its Performance Characterization[J].Plating & Finishing,2020,(8):12.[doi:10.3969/j.issn.1001-3849.2020.01.003]
[4]张永霞,王 玫,方 华*,等.Co3O4/碳纳米管复合膜的超级电容器性能[J].电镀与精饰,2020,(2):1.[doi:10.3969/j.issn.1001-3849.2020.02.001]
ZHANG Yongxia,WANG Mei,FANG Hua*,et al.Co3O4/Carbon Nanotube Composite Film for Supercapacitor and Its Performances[J].Plating & Finishing,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.02.001]
[5]侯珂珂,陈新华,张万强,等.电沉积法制备仿生超疏水滤网及其油水分离性能[J].电镀与精饰,2020,(4):1.[doi:10.3969/j.issn.1001-3849.2020.04.0010]
HOU Keke,CHEN Xinhua,ZHANG Wanqiang,et al.Preparation of Biomimetic Superhydrophobic Filter Screen by Electrodeposition and the Oil-Water Separation Performance[J].Plating & Finishing,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.04.0010]
[6]肖成龙,梁世雍,于兆勤*.可控阵列微柱超疏水表面实验研究[J].电镀与精饰,2020,(7):27.[doi:10.3969/j.issn.1001-3849.2020.07.0060]
XIAO Chenglong,LIANG Shiyong,YU Zhaoqin*.Experimental Study on Superhydrophobic Surface of Controllable Array Microcolumns[J].Plating & Finishing,2020,(8):27.[doi:10.3969/j.issn.1001-3849.2020.07.0060]
[7]徐 超,王淼宇,周建波,等.电沉积Ni-Mo-Fe-La合金析氢电极的工艺研究[J].电镀与精饰,2020,(8):7.[doi:10.3969/j.issn.1001-3849.2020.08.0020]
XU Chao,WANG Miaoyu,ZHOU Jianbo,et al.Study on Electrodeposition Process of Ni-Mo-Fe-La Alloy Hydrogen Evolution Electrode[J].Plating & Finishing,2020,(8):7.[doi:10.3969/j.issn.1001-3849.2020.08.0020]
[8]高 辉,刘伟杰*.2A12铝合金电沉积Ni-Co-MoS2复合镀层的耐磨性能研究[J].电镀与精饰,2020,(10):1.[doi:10.3969/j.issn.1001-3849.2020.10.0010]
GAO Hui,LIU Weijie*.Research on Wear Resistance of Ni-Co-MoS2 Composite Coating Electrodeposited on 2A12 Aluminium Alloy[J].Plating & Finishing,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.10.0010]
[9]王 羽,刘励昀,杜荣斌*,等.添加剂MPS、DDAC、Cl-对铜箔电沉积的影响[J].电镀与精饰,2021,(5):1.[doi:10.3969/j.issn.1001-3849.2021.05.001]
WANG Yu,LIU Liyun,DU Rongbin*,et al.Effects of Additives MPS， DDAC and Cl- on the Copper Foil[J].Plating & Finishing,2021,(8):1.[doi:10.3969/j.issn.1001-3849.2021.05.001]
[10]杨惠良*.硫酸盐镀液中紫铜电沉积Ni-Co/WC复合镀层的工艺条件优化[J].电镀与精饰,2021,(6):30.[doi:10.3969/j.issn.1001-3849.2021.06.007]
YANG Huiliang*.Optimization of Process Conditions for Electrodeposition of Ni-Co/WC Composite Coatings on Red Copper from Sulfate Bath[J].Plating & Finishing,2021,(8):30.[doi:10.3969/j.issn.1001-3849.2021.06.007]
备注/Memo
收稿日期： 2020-12-10；修回日期： 2021-02-12
作者简介： 王晓丽（1978-），女，博士，副教授，主要研究方向：特种加工，Email：2006000018@jou.edu.cn
基金项目： 江苏省3D打印装备及应用技术重点建设实验室（南通理工学院）开放基金资助项目（2018KFKT05），南通市