ZHANG Bingyi,ZHANG Shasha*,YAO Zhengjun,et al.Preparation and Microhardness of Electrodeposited Ni-W Nanocrystalline Coatings[J].Plating & Finishing,2019,(8):20-24.[doi:10.3969/j.issn.1001-3849.2019.08.005]
电沉积Ni-W纳米晶镀层制备与显微硬度研究
- Title:
- Preparation and Microhardness of Electrodeposited Ni-W Nanocrystalline Coatings
- 文献标志码:
- A
- 摘要:
- 采用直流电沉积方法在Cu基体表面制备Ni-W纳米晶镀层,研究了电沉积过程中电流密度、pH值和温度对镀层物相结构和力学性能的影响。结果表明,W含量和镀层显微硬度随着电流密度和温度的增加而逐渐增加。对电沉积层进行不同温度下的真空热处理,研究了热处理温度对Ni-1.3%W 和Ni-29%W两种合金镀层晶粒尺寸和硬度的影响,发现W含量的增加显著抑制了镀层的晶粒粗化过程。在固溶强化效应的作用下,Ni-29%W热处理前的显微硬度明显高于Ni-1.3%W。经过200 ℃真空热处理后Ni-1.3%W显微硬度显著增加并高于Ni-29%W,这可能是固溶在Ni里的W发生扩散和偏析,钉扎晶界引起的。合金在较高温度真空热处理后出现显微硬度下降主要是由于晶粒粗化引起的。
- Abstract:
- In present study, the Ni-W nanocrystalline coating was prepared on the surface of Cu substrate by direct current electrodeposition. The effect of current density, pH value and temperature on the phase structure and mechanical properties of the coating were studied. The results show that the tungsten concentration and the micro-hardness of the coating increase with the increase of current density and temperature. At the same time, heat treatment in vacuum was carried out on the electrodeposited films at different temperatures, and the influence of heat treatment temperature on the grain size and hardness of the Ni-1.3%W and Ni-29%W alloy coatings was studied. It is found that the increase of the tungsten concentration significantly inhibits the grain coarsening process. Under the effect of solid solution strengthening, the micro-hardness of Ni-29%W before heat treatment is significantly higher than that of Ni-1.3%W. After heat treatment at 200 ℃, the microhardness of the Ni-1.3%W alloy increases significantly, which is higher than that of Ni-29%W. This is probably due to the diffusion and segregation of tungsten in the solid solution of nickel, leading to the pinning of grain boundaries. The microhardness starts to decrease at high temperature, which is due to the coarsening of the grain size.
参考文献/References:
[1] 李林超, 胡会利, 刘爽.硫酸盐体系电沉积镍钨合金工艺研究[J]. 表面技术, 2017, 46(7):85-90.
[2] 吴化, 韩双, 吴一.电沉积方法制备纳米晶Ni-W合金工艺研究[J]. 表面技术, 2009, 38(2):65-69.
[3] 舒霞, 吴玉程, 史成武, 等. 电沉积Ni-W合金纳米晶的组织与性能[J]. 有色金属, 2006, (58):31-35.
[4] 吴玉程, 舒霞, 李云, 等. 电沉积Ni-W合金纳米晶镀层组织形貌与显微硬度[J]. 机械工程学报, 2007, 43(12):69-73.
[5] 李晓闲, 刘美霞, 张雪辉, 等. 热处理对Ni-W-Go复合镀层组织及性能的影响[J]. 有色金属科学与工程, 2017, 8(5):115-120.
[6] 王凤娥. 电沉积镍基合金的研究进展[J]. 稀有金属, 1998, 22(5): 377- 378.
[7] 陈颢, 羊建高, 李金辉,等. 电沉积钨基合金镀层工艺研究[J]. 有色金属科学与工程, 2013, 4(5): 28-32.
[8] 吴玉程, 舒霞, 郑玉春,等. Ni-W纳米晶合金电沉积工艺条件的研究[J]. 电镀与涂饰, 2004 , 23(4):000018-21.
[9] 于杰. 电沉积纳米镍的制备及力学和耐腐蚀性能研究[D]. 吉林:吉林大学, 2007:12-13.
[10] 陶杰, 姚正军, 薛峰. 材料科学基础[M]. 北京:化学工业出版社, 2006:429-430.
[11] 杨建明, 朱荻, 雷卫宁. 电沉积法制备纳米晶材料的研究进展[J]. 材料保护, 2003, 36(4):1-4.
[12] 舒霞. 电沉积镍基合金纳米晶及组织结构与性能研究[D]. 合肥:合肥工业大学, 2004:9-10
[13] Hu J, Shi Y N, Sauvage X, et al. Grain boundary stability governs hardening and softening in extremely fine nanograined metals[J]. Science, 2017, 355 (6331):1292-1296.
[14] 杨防祖, 曹刚敏, 郑雪清, 等. 镍钨合金电沉积的电流效率和镀层显微硬度[J]. 电镀与涂饰, 1999, 18(3):1-4.
[15] Hou K H, Chang Y F, Chang S M, et al. The heat treatment effect on the structure and mechanical properties of electrodeposited nano grain size Ni-W alloy coatings[J]. Thin Solid Films, 2010, (518):7535-7540.
相似文献/References:
[1]雷同鑫,鞠 辉,张长科,等.电镀Ni-W-P合金在钻杆接头上的应用[J].电镀与精饰,2019,(10):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
LEI Tongxin,JU Hui,ZHANG Changke,et al.Application of Ni-W-P Alloy Prepared by Electroplating to Tool Joints[J].Plating & Finishing,2019,(8):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
[2]李晓峰*,孟 芳,董会超,等.电沉积法制备掺铋金属锌及其性能表征[J].电镀与精饰,2020,(1):12.[doi:10.3969/j.issn.1001-3849.2020.01.003]
LI Xiaofeng*,MENG Fang,DONG Huichao,et al.Electrodeposited Preparation of Bi-Doped Metal Zinc and Its Performance Characterization[J].Plating & Finishing,2020,(8):12.[doi:10.3969/j.issn.1001-3849.2020.01.003]
[3]张永霞,王 玫,方 华*,等.Co3O4/碳纳米管复合膜的超级电容器性能[J].电镀与精饰,2020,(2):1.[doi:10.3969/j.issn.1001-3849.2020.02.001]
ZHANG Yongxia,WANG Mei,FANG Hua*,et al.Co3O4/Carbon Nanotube Composite Film for Supercapacitor and Its Performances[J].Plating & Finishing,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.02.001]
[4]侯珂珂,陈新华,张万强,等.电沉积法制备仿生超疏水滤网及其油水分离性能[J].电镀与精饰,2020,(4):1.[doi:10.3969/j.issn.1001-3849.2020.04.0010]
HOU Keke,CHEN Xinhua,ZHANG Wanqiang,et al.Preparation of Biomimetic Superhydrophobic Filter Screen by Electrodeposition and the Oil-Water Separation Performance[J].Plating & Finishing,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.04.0010]
[5]肖成龙,梁世雍,于兆勤*.可控阵列微柱超疏水表面实验研究[J].电镀与精饰,2020,(7):27.[doi:10.3969/j.issn.1001-3849.2020.07.0060]
XIAO Chenglong,LIANG Shiyong,YU Zhaoqin*.Experimental Study on Superhydrophobic Surface of Controllable Array Microcolumns[J].Plating & Finishing,2020,(8):27.[doi:10.3969/j.issn.1001-3849.2020.07.0060]
[6]徐 超,王淼宇,周建波,等.电沉积Ni-Mo-Fe-La合金析氢电极的工艺研究[J].电镀与精饰,2020,(8):7.[doi:10.3969/j.issn.1001-3849.2020.08.0020]
XU Chao,WANG Miaoyu,ZHOU Jianbo,et al.Study on Electrodeposition Process of Ni-Mo-Fe-La Alloy Hydrogen Evolution Electrode[J].Plating & Finishing,2020,(8):7.[doi:10.3969/j.issn.1001-3849.2020.08.0020]
[7]高 辉,刘伟杰*.2A12铝合金电沉积Ni-Co-MoS2复合镀层的耐磨性能研究[J].电镀与精饰,2020,(10):1.[doi:10.3969/j.issn.1001-3849.2020.10.0010]
GAO Hui,LIU Weijie*.Research on Wear Resistance of Ni-Co-MoS2 Composite Coating Electrodeposited on 2A12 Aluminium Alloy[J].Plating & Finishing,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.10.0010]
[8]王 羽,刘励昀,杜荣斌*,等.添加剂MPS、DDAC、Cl-对铜箔电沉积的影响[J].电镀与精饰,2021,(5):1.[doi:10.3969/j.issn.1001-3849.2021.05.001]
WANG Yu,LIU Liyun,DU Rongbin*,et al.Effects of Additives MPS, DDAC and Cl- on the Copper Foil[J].Plating & Finishing,2021,(8):1.[doi:10.3969/j.issn.1001-3849.2021.05.001]
[9]杨惠良*.硫酸盐镀液中紫铜电沉积Ni-Co/WC复合镀层的工艺条件优化[J].电镀与精饰,2021,(6):30.[doi:10.3969/j.issn.1001-3849.2021.06.007]
YANG Huiliang*.Optimization of Process Conditions for Electrodeposition of Ni-Co/WC Composite Coatings on Red Copper from Sulfate Bath[J].Plating & Finishing,2021,(8):30.[doi:10.3969/j.issn.1001-3849.2021.06.007]
[10]孟香茗,宋振兴*,卜路霞,等.电沉积法制备纳米线阵列的研究进展[J].电镀与精饰,2021,(6):35.[doi:10.3969/j.issn.1001-3849.2021.06.008]
MENG Xiangming,SONG Zhenxing*,BU Luxia,et al.Research Progress of Producing Nanowire Arrays by Electrodeposition[J].Plating & Finishing,2021,(8):35.[doi:10.3969/j.issn.1001-3849.2021.06.008]
备注/Memo
收稿日期: 2019-03-29;修回日期: 2019-04-27
通信作者: 张莎莎, email:s.zhang@nuaa.edu.cn
基金项目: 大学生创新训练计划项目(201810287052),面向苛刻环境的材料制备与防护技术工业和信息化部重点实验室开放课题基金资助项目(No.56XCA17006)