ZHANG Yujie,YANG Jianhua,XU lingping.Application of Laser Cladding Technology in Mechanical Parts with Surface Failure[J].Plating & Finishing,2021,(8):39-43.[doi:10.3969/j.issn.1001-3849.2021.08.009]
激光熔覆技术在表面失效机械件中的应用
- Title:
- Application of Laser Cladding Technology in Mechanical Parts with Surface Failure
- 文献标志码:
- A
- 摘要:
- 阐述了激光熔覆的技术原理和系统的结构，重点介绍了激光熔覆技术在耐磨损和耐腐蚀方面的研究进展，总结了磨损失效和腐蚀失效机械件的修复再制造的具体应用，分析了激光熔覆技术在失效机械件修复再制造应用的可行性和先进性，展望了激光熔覆技术在失效机械件上的应用前景。
- Abstract:
- The technical principle of laser cladding and the structure of laser cladding system were described. The research progress of laser cladding technology in wear resistance and corrosion resistance was introduced, and the specific application of remanufacturing of mechanical parts with wear failure and corrosion failure was summarized. The feasibility and advanced nature of laser cladding technology in repairing and remanufacturing of failed mechanical parts were analyzed, and the application prospect of the technology in the failure mechanical parts was prospected.
参考文献/References:
[1] Cui L J, Cao Y L, Zeng W H, et al. Laser cladding Fe-base alloy coatings structure for marine hydraulic column[J]. Science of Advanced Materials, 2019, 11, 854-861.
[2] Samar R A A, Abdel H A H , Adel A M S, et al. Laser powder cladding of Ti-6Al-4Vα/β alloy[J]. Materials, 2017, 10, 1178-1193.
[3] Yu T B, Bao Y T. Research on manufacturing technology of thin-walled parts of Fe105 metal based on laser cladding[J]. Journal of Physics: Conference Series, 2019, 1187(3) : 32-43.
[4] Jim F, Crawford C, Stephen F, et al. Remanufacture of hot forging tools and dies using laser metal deposition with powder and a hard-facing alloy stellite [J]. Journal of Remanufacturing, 2019, 9, 189-203.
[5] 张津超,石拓,李刚,等.开放环境下激光内送粉熔覆TC4钛合金的氧化行为[J]. 表面技术,2020,49(2):243-251.
Zhang J C, Shi T, Li G, et al. Oxidation of TC4 titanium alloy processed by laser inside powderfeeding technology in open environment[J]. Surface Technology, 2020, 49(2): 243-251 (in Chinese).
[6] Zhu G X, Shi S H, Fu G Y, et al. The influence of the substrate-inclined angle on the section size of laser cladding layers based on robot with the inside-beam powder feeding [J]. The International Journal of Advanced Manufacturing Technology, 2017, 88, 2163-2168.
[7] Zhu L D, Wang S H, Pan H C, et al. Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology[J]. Journal of Manufacturing Processes, 2020, 49, 344-354.
[8] 魏铭.稀土氧化物CeO2对H13钢激光熔覆钴基合金组织和性能的影响[D]. 哈尔滨,哈尔滨工业大学,2018.
[9] 王贤才,张亚普,柴蓉霞. 27SiMn钢表面激光熔覆304不锈钢的组织和性能[J]. 金属热处理,2020, 45(4):188-193.
Wang X C, Zhang Y P, Chai R X. Microstructure and properties of 304 stainless steel laser cladding on 27SiMn steel surface[J]. Heat Treatment of Metals, 2020, 45(4):188-193 (in Chinese).
[10] Li K B, Dong L, Liu D Y,et al. Microstructure evolution and mechanical properties of multiple-layer laser cladding coating of 308L stainless steel[J]. Applied Surface Science, 2015, 340, 143-150.
[11] 张磊,陈小明,苏建灏,等.激光熔覆Fe-Mo-V-C合金涂层组织及摩擦磨损性能[J]. 粉末冶金材料科学与工程,2020, 25(1):65-71.
Zhang L, Chen X M, Su J H, et al. Microstructure and frictional wear performance of Fe-Mo-V-C alloy coating prepared by laser cladding[J]. Materials Science and Engineering of Powder Metallurgy, 2020, 25(1): 65-71 (in Chinese).
[12] Zhang Y, Han T F, Xiao M, et al. Preparation of diamond reinforced NiCoCrTi0.5Nb0.5 high-entropy alloy coating by laser cladding: Microstructure and wear behavior[J]. Journal of Thermal Spray Technology, 2020, 29, 1827-1837.
[13] 朱福栋,朱必云,马长平.激光增材制造Co/WC增强Ni基复合涂层的组织与耐磨性能[J]. 材料热处理学报,2019, 40(9) : 142-148.
Zhu F D, Zhu B Y, Ma C P. Microstructure and wear resistance of Co/WC enhanced Ni-based composite coating by laser additive manufacturing[J]. Transactions of Materials and Heat Treatment, 2019, 40( 9): 142-148 (in Chinese).
[14] Qin R Y, Zhang X J, Guo S Q, et al. Laser cladding of high Co-Ni secondary hardening steel on 18Cr2Ni4WA steel[J]. Surface & Coatings Technology, 2016, 285, 242-248.
[15] Liu Y, Wu Y, Ma Y M, et al. High temperature wear performance of laser cladding Co06 coating on high-speed train brake disc[J]. Applied Surface Science, 2019, 481, 761-766.
[16] 白新波.宝钢连退支撑辊辊颈激光熔覆修复工艺研究[J]. 热加工工艺, 2020, 49(10): 81-83.
Bai X B. Study on laser cladding repair technology of roller neck of continuous annealingsupport roller in Baosteel[J]. Hot Working Technology, 2020, 49(10):81-83 (in Chinese).
[17] 王运喜, 韩超. 利用激光熔覆技术修复核电厂上充泵转子[J]. 电力安全技术, 2020, 22(1): 68-73.
Wang Y X, Han C. Repair of the charging punp rotor with laser cladding technique in nuclear power plant[J]. Electric Safety Technology, 2020, 22(1):68-73 (in Chinese).
[18] 程建峰. MT5500卡车进口电动轮激光表面熔敷修复工艺研究[J]. 露天采矿技术, 2018, 33(6): 87-91.
Cheng J F. Research on MT5500 truck electric wheels laser cladding repair process[J]. Opencast Mining Technology, 2018, 33(6):87-91 (in Chinese).
[19] 朱成才, 张自强, 白海明, 等. 激光熔覆Ni-TiC-Cr涂层的耐腐蚀性能研究[J]. 材料保护, 2020, 53(3): 71-77.
Zhu C C, Zhang Z Q, Bai H M, et al. Corrosion resistance of Ni-TiC-Cr coating prepared by laser cladding [J]. Materials Protection, 2020, 53(3):71-77 (in Chinese).
[20] 郭岩,叶智,杨文涛,等.含碳化钨的镍基和铁基合金激光熔覆层的组织结构与耐盐雾腐蚀性能[J]. 电镀与精饰, 2019, 38(19):1054-1059.
Guo Y, Ye Z, Yang W T. Microstructure and salt spray corrosion resistance of laser-clad nickel-based and iron-based layers containing tungsten carbide[J]. Electropating & Finishing, 2019, 38(19): 1054-1059 (in Chinese).
[21] 鲍亚运,纪秀林,姬翠翠,等. 激光熔覆FeCrNiCoCuAlx高熵合金涂层的耐腐蚀与抗冲蚀性能[J]. 材料工程,2019,47(11):141-147.
Bao Ya Y, Ji X L, Ji C C, et al. Corrosion and slurry erosion properties of FeCrNiCoCuAlx high-entropy alloy coating prepared by laser cladding[J]. Journal of Materials Engineering, 2019, 47(11): 141-147 (in Chinese).
[22] 陈坚,胡碧康,吴贺利,等.激光熔覆铁基合金粉末的组织及耐蚀性能[J]. 材料保护, 2019, 52(12):150-153.
Chen J ,Hu B K,Wu H L, et al. Structure and corrosion resistance of laser cladding Fe-based alloys[J]. Materials Protection, 2019, 52(12):150-153 (in Chinese).
[23] 吴小树.轧机牌坊现场防腐激光熔覆的应用[C]. 第十届中国钢铁年会暨第六届宝钢学术年会论文集,2015.
[24] 肖洁,丁涛.基于激光熔覆的采煤机高速轴耐蚀性能研究[J]. 激光杂志,2020,41(4):130-135.
Xiao J, Ding T. Study on high speed shaft corrosion resistance of axle based on laser cladding [J]. Laser Journal, 2020, 41(4): 130-135 (in Chinese).
[25] 黎文强,马宗彬,丁紫阳.基于激光熔覆技术的矿用液压支架修复[J]. 煤矿机械,2016, 37(11):122-123.
Li W Q, Ma Z B, Ding Z Y. Mine hydraulic support repair based on laser cladding technology [J]. Coal Mine Machinery, 2016, 37(11):122-123 (in Chinese).
[26] 付祖冈,张自强,孟贺超,等.激光熔覆技术在高腐蚀环境下液压支架的实验研究[J]. 煤炭科学技术,2018,46(5):155-160.
Fu Z G, Zhang Z Q, Meng H C, et al. Experimental study of laser cladding technology for hydraulic support in high corrosive environment[J]. Coal Science and Technology, 2018, 46(5): 155-160 (in Chinese).
[27] 栗卓新,丁卫东,李国栋,等.液压支架立柱活塞杆表面修复工艺的现状与进展[J]. 煤炭技术,2014,33(10):187-190.
Li Z X, Ding W D, Li G D, et al. Current situation and progress of reparation process for hydraulic support piston rod[J]. Coal Technology, 2014, 33(10):187-190 (in Chinese).
相似文献/References:
[1]程宝改,李宝增,谢美芳,等.喷砂对水性涂装漆膜形貌与性能的影响[J].电镀与精饰,2019,(7):31.[doi:10.3969/j.issn.1001-3849.2019.07.007]
CHENG Baogai,LI Baozeng,XIE Meifang,et al.Influence of Sandblasting on Morphology and Adhesion of Water-Borne Film[J].Plating & Finishing,2019,(8):31.[doi:10.3969/j.issn.1001-3849.2019.07.007]
[2]李红艳*,李增权,徐明磊.Ce2O3的颗粒度对农机涂装附着力的影响[J].电镀与精饰,2020,(9):11.
LI Hongyan*,LI Zengquan,XU Minglei.Effect of Particle Size of Ce2O3 on Adhesion of Agricultural Machinery Coating[J].Plating & Finishing,2020,(8):11.
[3]李增权*,李红艳.氟碳面漆抗老化性能研究[J].电镀与精饰,2021,(7):47.[doi:10.3969/j.issn.1001-3849.2021.07.009]
LI Zengquan*,LI Hongyan.Anti-Aging Performance of Fluorocarbon Finish[J].Plating & Finishing,2021,(8):47.[doi:10.3969/j.issn.1001-3849.2021.07.009]
[4]李永迪,宫明江,于茂来,等.环保高效热镀锌合金钢丝技术研究[J].电镀与精饰,2021,(12):52.[doi:10.3969/j.issn.1001-3849.2021.12.011]
LI Yongdi,GONG Mingjiang,YU Maolai,et al.Environmental Protection and High-Efficiency Hot-Dip Zinc Alloy Steel Wire Technology Research[J].Plating & Finishing,2021,(8):52.[doi:10.3969/j.issn.1001-3849.2021.12.011]
[5]陈宇威,魏长伟,罗洪秦,等. 基于方波交流极化制备彩色超疏水不锈钢表面的研究 [J].电镀与精饰,2022,(9):25.[doi:10.3969/j.issn.1001-3849.2022.09.005]
CHEN Yuwei,WEI Changwei,LUO Hongqin,et al.Preparation of Colored Superhydrophobic Stainless Steel Surface Based on Square-Wave AC Polarization[J].Plating & Finishing,2022,(8):25.[doi:10.3969/j.issn.1001-3849.2022.09.005]
[6]陈婧*.粗糙度对水性涂料涂装膜层结合力的影响?/div>[J].电镀与精饰,2022,(12):25.[doi:10.3969/j.issn.1001-3849.2022.12.004]
CHEN Jing *.Effect of Roughness on Adhesion of Waterborne Coatings[J].Plating & Finishing,2022,(8):25.[doi:10.3969/j.issn.1001-3849.2022.12.004]
[7]吕成斌*,吕鹏,魏亚平,等.环保无氰电镀银镀层在人工汗液中的耐腐蚀性能研究[J].电镀与精饰,2022,(12):88.[doi:10.3969/j.issn.1001-3849.2022.12.012]
LYU Chengbin*,LYU Peng,WEI Yaping,et al.Corrosion Property of Environment-Friendly Cyanide Free Electroplating Silver Coating in Artificial Sweat[J].Plating & Finishing,2022,(8):88.[doi:10.3969/j.issn.1001-3849.2022.12.012]
[8]石圆圆*,罗玉凤. 轻轨建筑钢结构的表面防护与性能研究 [J].电镀与精饰,2023,(3):60.[doi:10.3969/j.issn.1001-3849.2023.03.009]
Shi Yuanyuan*,Luo Yufeng.Study on surface protection and properties of light rail building steel structure[J].Plating & Finishing,2023,(8):60.[doi:10.3969/j.issn.1001-3849.2023.03.009]
[9]张棣尧,袁磊,于景坤*.薄带连铸结晶辊涂层研究进展[J].电镀与精饰,2023,(4):94.[doi:10.3969/j.issn.1001-3849.2023.04.015]
Zhang Diyao,Yuan Lei,Yu Jingkun*.Research progress on coating of crystallization roller used for thin strip continuous casting and rolling[J].Plating & Finishing,2023,(8):94.[doi:10.3969/j.issn.1001-3849.2023.04.015]
[10]和豪涛,王 晨,李金辉,等.汽车用AZ91镁合金的表面激光改性研究[J].电镀与精饰,2023,(5):41.[doi:10.3969/j.issn.1001-3849.2023.05.006]
He Haotao,Wang Chen,Li Jinhui,et al.Study on laser surface modification of AZ91 magnesium alloy for automobile[J].Plating & Finishing,2023,(8):41.[doi:10.3969/j.issn.1001-3849.2023.05.006]
备注/Memo
收稿日期： 2020-08-08；修回日期： 2020-09-27
作者简介： 张玉杰，女，副教授，硕士， Email： zyjyt_70@163.com
基金项目： 烟台市重点研发计划（2018XSCC036）；山东省高等学校青创科技支持计划（2019KJB001）