参考文献/References:
[1] 王珊珊. Ni、Ag、Cr电沉积薄膜的制备及其微观组织和力学性能分析[D]. 洛阳:河南科技大学, 2011.
[2] 邹森, 李亚明, 杨凤梅. 电流密度对氨基磺酸镍电镀镍镀层的影响[J]. 山东化工, 2011, 40(8):55-56.
Zou S, Li Y M, Yang F M. Effection of current density on the nickel coating of nickel sulfamate [J]. Shandong Chemical Industry, 2011, 40(8):55-56 (in Chinese).
[3] 王宗雄, 储荣邦, 鲍新华. 实用氰化镀银工艺[J]. 电镀与涂饰, 2015, 34(24):1424-1438.
Wang Z X, Chu R B, Bao X H. Practical cyanide silver electroplating processes[J]. Electroplating & Finishing. 2015, 34(24):1424-1438 (in Chinese).
[4] 高海桓, 卜路霞, 王为. 浅谈电镀技术的发展及应用[J]. 电镀与精饰, 2016, 38(5): 29-33.
Gao H H, Bu L X, Wang W. Future development and application of plating technology [J]. Plating & Finishing, 2016, 38(5): 29-33 (in Chinese).
[5] 赵健伟. 温度和电流密度对无氰镀银层微观形貌的影响[J]. 电镀与精饰, 2014, 36(7): 12-15.
Zhao J W. Effects of temperature and current density on coating microscopic morphology in cyanide-free silver plating[J]. Plating & Finishing, 2014, 36(7): 12-15 (in Chinese).
相似文献/References:
[1]徐美玲,亢淑梅,陈婷婷,等.添加氯化铈对镁合金Ni?P化学镀镀层性能影响[J].电镀与精饰,2019,(1):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
XU Meiling,KANG Shumei,CHEN Tingting,et al.Properties of Electroless Plating Ni?P on Magnesium AlloySubstrate by Adding CeCl3[J].Plating & Finishing,2019,(4):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
[2]朱艳青.真空热压温度对等离子喷涂涂层性能的影响[J].电镀与精饰,2019,(1):5.[doi:10.3969/j.issn.1001-3849.2019.01.002]
ZHU Yanqing.Effects of Vacuum Hot Pressing Temperature on the Performance of Plasma Spraying Coating[J].Plating & Finishing,2019,(4):5.[doi:10.3969/j.issn.1001-3849.2019.01.002]
[3]刘冬冬,韩 冰,陈 燕,等.GCr15轴承内圈磁粒研磨光整实验[J].电镀与精饰,2019,(7):1.[doi:10.3969/j.issn.1001-3849.2019.07.001]
LIU Dongdong,HAN Bing,CHEN Yan,et al.Experimental Study on GCr15 Bearing Inner Ring Magnetite Grinding and Finishing[J].Plating & Finishing,2019,(4):1.[doi:10.3969/j.issn.1001-3849.2019.07.001]
[4]张冰怡,张莎莎*,姚正军,等.电沉积Ni-W纳米晶镀层制备与显微硬度研究[J].电镀与精饰,2019,(8):20.[doi:10.3969/j.issn.1001-3849.2019.08.005]
ZHANG Bingyi,ZHANG Shasha*,YAO Zhengjun,et al.Preparation and Microhardness of Electrodeposited Ni-W Nanocrystalline Coatings[J].Plating & Finishing,2019,(4):20.[doi:10.3969/j.issn.1001-3849.2019.08.005]
[5]唐 振,谭 俊*,叶 雄,等.糖精钠对Co-Ni合金镀层组织和性能的影响[J].电镀与精饰,2019,(9):7.[doi:10.3969/j.issn.1001-3849.2019.09.002]
TANG Zhen,TAN Jun*,YE Xiong,et al.Effect of Sodium Saccharin on Microstructure and Properties of Co-Ni Alloy Coating[J].Plating & Finishing,2019,(4):7.[doi:10.3969/j.issn.1001-3849.2019.09.002]
[6]王晓辉,李新梅*,张 景.喷涂距离对Al2O3-TiO2涂层组织与干摩擦性能的影响[J].电镀与精饰,2019,(11):1.[doi:10.3969/j.issn.1001-3849.2019.11.001]
WANG Xiaohui,LI Xinmei*,ZHANG Jing.Effect of Spray Distance on Microstructure and Wear Properties of Al2O3-TiO2 Coating[J].Plating & Finishing,2019,(4):1.[doi:10.3969/j.issn.1001-3849.2019.11.001]
[7]王 莉,李庭贵,王 凤.液压缸活塞销高温锰系磷化处理[J].电镀与精饰,2020,(4):32.[doi:10.3969/j.issn.1001-3849.2020.04.0070]
WANG Li,LI Tinggui,WANG Feng.High Temperature Manganese Phosphating Treatment of Piston Pin for Hydraulic Cylinder[J].Plating & Finishing,2020,(4):32.[doi:10.3969/j.issn.1001-3849.2020.04.0070]
[8]杨航城,田海燕.工艺参数对电镀镍钴合金及其性能的影响[J].电镀与精饰,2021,(4):5.[doi:10.3969/j.issn.1001-3849.2021.04.002]
YANG Hangcheng,TIAN Haiyan.Effect of Process Parameters on Electrodepositing Ni-Co Alloy and Its Properties[J].Plating & Finishing,2021,(4):5.[doi:10.3969/j.issn.1001-3849.2021.04.002]
[9]崔琳琳,庄向仕,陈雅兵.电流密度对建筑用6463铝合金柠檬酸阳极氧化膜性能的影响[J].电镀与精饰,2021,(8):1.[doi:10.3969/j.issn.1001-3849.2021.08.001]
CUI Linlin,ZHUANG Xiangshi,CHEN Yabing.Effect of Current Density on Properties of Citric Acid Anodic Oxide Films on 6463 Aluminum Alloy Used for Construction[J].Plating & Finishing,2021,(4):1.[doi:10.3969/j.issn.1001-3849.2021.08.001]
[10]窦忠宇,王 婷,张荣宇,等.N离子注入改善2195铝锂合金的耐磨和腐蚀性能[J].电镀与精饰,2022,(11):6.[doi:10.3969/j.issn.1001-3849.2022.11.002]
DOU Zhongyu,WANG Ting,ZHANG Rongyu,et al.N Ion Implantation Improves the Wear and Corrosion Properties of 2195 Al-Li Alloy[J].Plating & Finishing,2022,(4):6.[doi:10.3969/j.issn.1001-3849.2022.11.002]