WANG Xiaoqi*,CAO Hui,LEI Biao.Structure and Properties of TiAlN Films by Arc Ion Plating on Mg Alloys[J].Plating & Finishing,2021,(6):25-29.[doi:10.3969/j.issn.1001-3849.2021.06.006]
镁合金表面电弧离子镀TiAlN薄膜的结构与性能研究
- Title:
- Structure and Properties of TiAlN Films by Arc Ion Plating on Mg Alloys
- 文献标志码:
- A
- 摘要:
- 镁合金抗腐蚀性能差,其腐蚀电位在实用金属中最负。针对这一问题采用表面镀膜的方法,在三组镁合金基体上采用电弧离子镀方法在相同的参数下制备了Al原子掺杂的TiAlN薄膜。通过XRD和SEM研究了不同镁合金基体上薄膜的微观结构;采用电化学极化曲线、Nyquist图和腐蚀形貌分析了不同基体上薄膜的耐蚀性能,采用划痕仪得到了膜基结合强度。结果表明:薄膜由TiN、AlN和TiAlN三种物相组成,沉积在不同基体上薄膜的衍射峰强度和择优取向不同,薄膜表面形貌及粗糙度受基体前处理状态的影响,镀膜后的镁合金基体的腐蚀电位有明显的提高,腐蚀电流密度下降了两个数量级,阻抗值约为基体的25倍。其中,Al6Zn1Mg1.5Ce镀膜基体的耐蚀性能最佳,并且与基体的结合力Lc1大于20 N。
- Abstract:
- The corrosion potential of magnesium alloys is the most negative among practical metals, and their corrosion resistance is very poor. To solve this problem, Al atom doped TiAlN films were prepared by arc ion plating on three groups of magnesium alloys with the same parameters. The microstructure of the films was studied by means of XRD and SEM, the corrosion resistance was evaluated by means of electrochemical polarization curves, Nyquist plots and corrosion morphology, and the adhesion strength of the films was obtained by means of scratch instrument. The results showed that the films were composed of TiN, AlN and TiAlN phases. The diffraction peak intensity and preferred orientation of the films deposited on different substrates were different. The surface morphology and roughness of the films were influenced by the pretreatment condition of the substrates. The corrosion potential of the coated substrate increased obviously, and the corrosion current density decreased by two orders of magnitude, the impedance value of the coating was about 25 times that of the substrate. The corrosion resistance of coating deposited on Al6Zn1Mg1.5Ce was the best, and the binding force of the film Lc1 was greater than 20 N.
参考文献/References:
[1] 王涛, 巫瑞智, 李吉庆, 等. Ca对Mg-5Li-3Al-2Zn合金组织和力学性能的影响[J]. 铸造技术, 2009, 30(12):1559-1562.
Wang T, Wu R Z, Li J Q, et al. Effect of Ca on microstructure and mechanical properties of Mg-5Li-3Al-2Zn Alloy[J]. Foundry Technology, 2009, 30(12): 1559-1562(in Chinese).
[2] Wang J Y, Li M Q, Zhang D Q, et al. Corrosion resistance and cell compatibility in vitro of Chinese herbal extract coating on magnesium[J]. Results in Physics, 2019, 12: 1465-1474.
[3] Apelfeld A, Krit B, Ludin V, et al. The characterization of plasma electrolytic oxidation coatings on AZ41 magnesium alloy[J]. Surface & Coatings Technology, 2017, 322: 127-133.
[4] 李玉海, 张白冰, 董旭光, 等. Mg-Mn-RE微弧氧化陶瓷膜层耐蚀性对比研究[J]. 材料研究学报, 2016, 30(3):235-240.
Li Y M, Zhang B B, Dong X G, et al. Comparative study on corrosion resistance of Mg-Mn-RE micro-arc oxide ceramic film[J]. Chinese Journal of Materials Research, 2016, 30(3): 235-240 (in Chinese).
[5] 王福会, 杜克勤, 张伟. 镁合金的腐蚀与防护研究进展[J]. 中国材料进展, 2011, 30(2): 29-33.
Wang F H, Du K Q, Zhang W. Research progress on corrosion and protection of magnesium alloys[J]. Materials China, 2011, 30(2): 29-33 (in Chinese).
[6] 曹慧, 郭玉利, 韩晓雷. 不同负偏压下磁控溅射纳米TiAlN薄膜的微观结构与耐蚀性能[J]. 材料保护, 2018,51(12): 18-22.
Cao H, Guo Y L, Han X L. Microstructure and corrosion resistance of nano TiAlN coatings[J]. Materials Protection, 2018, 51(12): 18-22 (in Chinese).
[7] 朱军亮, 王更柱, 解志文, 等. Ti-Al-N涂层的组织结构与摩擦学性能[J]. 表面技术, 2015, 44(4): 54-59.
Zhu J L, Wang G Z, Xie Z W, et al. Microstructure and tribological properties of Ti-Al-N coatings[J]. Surface Technology, 2015, 44(4): 54-59 (in Chinese).
[8] Quesada F, Mari?o A, Restrepo E. TiAlN coatings deposited by r.f. magnetron sputtering on previously treated ASTM A36 steel[J]. Surface & Coatings Technology, 2006, 201: 2925-2929.
[9] 周磊, 张立, 钟志强, 等. Al2O3基和AlxTi1-xN 基复合涂层的电化学研究[J]. 中南大学学报, 2018, 49(12): 2915-2921.
Zhou L, Zhang L, Zhong Z Q, et al. Electrochemical study of Al2O3 based and AlxTi1-xN based composite coatings[J]. Journal of Central South University, 2018, 49(12): 2915-2921 (in Chinese).
[10] Wu G S, Wang X M, Ding K J, et al. Corrosion behavior of Ti-Al-N/Ti-Al duplex coating on AZ31 magnesium alloy in NaCl aqueous solution[J]. Materials Characterization, 2009, 60: 803-807.
[11] Zhang X, Xiao G Y, Jiang C C, et al. Inflfluence of process parameters on microstructure and corrosion properties of hopeite coating on stainless steel[J]. Corrosion Science, 2015, 94: 428-437.
[12] 鲜晓斌, 王庆富, 刘柯钊, 等. 阴极电弧离子沉积TiN/Ti镀层腐蚀特性[J]. 稀有金属材料与工程, 2005, 34(11):1774-1777.
Xian X B, Wang Q F, Liu K Z, et al. Corrosion characteristics of TiN/Ti coating deposited by cathode arc ion[J]. Rare Metal Materials and Engineering, 2005, 34(11):1774-1777 (in Chinese).
[13] Antunes R A, Rodas A C D, Lima N B, et al. Study of the corrosion resistance and in vitro biocompatibility of PVD TiCN-coated AISI 316L austenitic stainless steel for orthopedic applications[J]. Surface & Coatings Technology, 2010, 205: 2074-2081.
[14] Sveen S, Andersson J M, Saoubi R M, et al. Scratch adhesion characteristics of PVD TiAlN deposited on high speed steel, cemented carbide and PCBN substrates[J]. Wear, 2013, 308: 133-141.
[15] Capote G, Silva G F, Trava-Airoldi V J. Effect of hexane precursor diluted with argon on the adherent diamond-like properties of carbon films on steel surfaces[J]. Thin Solid Films, 2015, 589: 286-291.
[16] 门海泉, 周灵平, 肖汉宁. AlN薄膜择优取向生长机理及制备工艺[J]. 人工晶体学报, 2005, 34(6): 1146-1152.
Men H Q, Zhou L P, Xiao H N. Growth mechanism and synthesizing methods of preferential orientation of AlN thin films[J]. Journal of Synthetic Crystals, 2005, 34(6):1146-1152 (in Chinese).
[17] Shi P, Niu B, Shanshan E, et al. Preparation and characterization of PLA coating and PLA/MAO composite coatings on AZ31 magnesium alloy for improvement of corrosion resistance[J]. Surface & Coatings Technology, 2015, 262: 26-32.
[18] 闫申, 刘菲. 化学镀时间对Ni-Co-P合金镀层性能的影响[J]. 电镀与精饰, 2020, 42(6): 18-22.
Yan S, Liu F. Effect of electroless plating time on properties of Ni-Co-P alloy coatings[J]. Plating & Finishing, 2020, 42(6): 18-22 (in Chinese).
相似文献/References:
[1]徐美玲,亢淑梅,陈婷婷,等.添加氯化铈对镁合金Ni?P化学镀镀层性能影响[J].电镀与精饰,2019,(1):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
XU Meiling,KANG Shumei,CHEN Tingting,et al.Properties of Electroless Plating Ni?P on Magnesium AlloySubstrate by Adding CeCl3[J].Plating & Finishing,2019,(6):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
[2]牟世辉,尹鸿鹍,代肇一.镀铜优化对AZ91D镁合金疏水膜性能的影响[J].电镀与精饰,2019,(6):29.[doi:10.3969/j.issn.1001-3849.2019.06.006]
MU Shihui,YIN Hongkun,DAI Zhaoyi.Effect of Copper Plating Optimization on the Performance of AZ91D Magnesium Alloy Hydrophobic Membrane[J].Plating & Finishing,2019,(6):29.[doi:10.3969/j.issn.1001-3849.2019.06.006]
[3]刘 玮,安成强*,郝建军,等.钼酸钠对AZ91D镁合金钒/锆复合转化膜性能的影响[J].电镀与精饰,2019,(8):10.[doi:10.3969/j.issn.1001-3849.2019.08.003]
LIU Wei,AN Chengqiang*,HAO Jianjun,et al.Effect of Na2MoO4 on Properties of Vanadium/Zirconate Conversion Coating on AZ91D Magnesium Alloy[J].Plating & Finishing,2019,(6):10.[doi:10.3969/j.issn.1001-3849.2019.08.003]
[4]李佳霖,郝建军,牟世辉.Fe2+对镁合金电化学磷化改性研究[J].电镀与精饰,2019,(10):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
LI Jialin,HAO Jianjun,MOU Shihui.Study on Electrochemical Phosphating Modification of Magnesium Alloy by Fe2+[J].Plating & Finishing,2019,(6):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
[5]贾启华,许晓娟*.沉积时间对镁合金化学镀镍的影响[J].电镀与精饰,2019,(12):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
JIA Qihua,XU Xiaojuan*.Effect of Deposition Time on Direct Electroless Plating of Magnesium Alloys[J].Plating & Finishing,2019,(6):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
[6]王 丽,顾 威,郭 荣,等.环保型无机缓蚀剂对AZ91D镁合金的缓蚀效果[J].电镀与精饰,2020,(4):18.[doi:10.3969/j.issn.1001-3849.2020.04.0040]
WANG Li,GU Wei,GUO Rong,et al.Inhibition Effect of Environmental Protection Inorganic Corrosion Inhibitor on AZ91D Magnesium Alloy[J].Plating & Finishing,2020,(6):18.[doi:10.3969/j.issn.1001-3849.2020.04.0040]
[7]党在清*.镁合金复合镀层的制备及其结构与性能表征[J].电镀与精饰,2020,(11):16.[doi:10.3969/j.issn.1001-3849.2020.11.0040]
DANG Zaiqing*.Study on the Structure and Properties of Composite Coating on Magnesium Alloy[J].Plating & Finishing,2020,(6):16.[doi:10.3969/j.issn.1001-3849.2020.11.0040]
[8]宋政伟*,丁莉峰,王沛霖,等.镁合金表面Ni-P/Cu-Zn超疏水复合涂层制备及耐蚀性研究[J].电镀与精饰,2021,(7):10.[doi:10.3969/j.issn.1001-3849.2021.07.002]
SONG Zhengwei*,DING Lifeng,WANG Peilin,et al.Preparation and Corrosion Resistance of Ni-P/Cu-Zn Super-Hydrophobic Composite Coating on the Surface of Mg Alloy[J].Plating & Finishing,2021,(6):10.[doi:10.3969/j.issn.1001-3849.2021.07.002]
[9]牟世辉*,李鑫宇.恒电流作用下AZ91D镁合金磷化膜生长研究[J].电镀与精饰,2021,(9):1.[doi:10.3969/j.issn.1001-3849.2021.09.001]
MU Shihui*,LI Xinyu.Growth of Phosphating Film on AZ91D Magnesium Alloy Under Constant Current[J].Plating & Finishing,2021,(6):1.[doi:10.3969/j.issn.1001-3849.2021.09.001]
[10]陈 力*,陈玉峰,张鉴达.镁合金表面硅酸盐封闭磷化膜的腐蚀失效行为[J].电镀与精饰,2022,(1):57.[doi:10.3969/j.issn.1001-3849.2022.01.010]
CHEN Li*,CHEN Yufeng,ZHANG Jianda.Corrosion Failure Behavior of Silicate Sealed Phosphating Film on Surface of Magnesium Alloy[J].Plating & Finishing,2022,(6):57.[doi:10.3969/j.issn.1001-3849.2022.01.010]
备注/Memo
收稿日期:2020-08-14;修回日期:2020-10-12
通信作者:王晓奇,email:453565029@qq.com