ZHANG Yuqing,CHEN Tongcai,WANG Chunxia,et al.Effect of Additives on the Performance of Cyanide-Free Cadmium Plating[J].Plating & Finishing,2021,(8):16-20.[doi:10.3969/j.issn.1001-3849.2021.08.004]
添加剂对无氰镀镉工艺性能的影响
- Title:
- Effect of Additives on the Performance of Cyanide-Free Cadmium Plating
- 文献标志码:
- A
- 摘要:
- 本文采用电沉积方法制备了镉镀层，采用X射线衍射仪（XRD）、扫描电子显微镜（SEM）、盐雾试验箱、接触角测量仪测试了镀液添加剂对镀层结构、耐蚀性及接触角的影响，并利用赫尔槽、库仑计测试了镀液的分散能力、电流效率及沉积速率。结果表明：镀液加入维生素B衍生物后，所得镀层晶粒尺寸为44.8 nm，结晶细致均匀，耐蚀性良好。该镀液的分散能力为84%，电流密度为1 A/dm2时的电流效率为64.7%，沉积速率约为0.425 μm/min。
- Abstract:
- In this paper, the cadmium coating was prepared by electrodeposition method. X-ray diffractometer （XRD）, scanning electron microscope （SEM）, salt spray test chamber, and contact angle measuring instrument were used to test the influence of plating solution additives on the coating structure, corrosion resistance and contact angle. And use Hull cell and coulometer to test the dispersion ability, current efficiency and deposition rate of the plating solution. The results showed that the coating deposited in the plating solution containing vitamin B derivatives had the good corrosion resistance, which had a fine and uniform crystals with the grain size of 44.8 nm. The dispersion capacity of the plating solution was 84%, the current efficiency was 64.7% when the current density was 1 A/dm2, and the deposition rate was about 0.425 μm/min.
参考文献/References:
[1] ?电镀手册?编写组编.电镀手册(上册)[M]. 北京:国防工业出版社,1977,236-237.
[2] 黄平,陈端杰.无氰镀镉工艺研究及应用[J]. 新技术新工艺,2008,11,17-18.
Huang P, Chen R J. Research and application of non-cyanide cadmium plating process [J]. New Technology & New Process, 2008, 11,17-18 (in Chinese).
[3] 万冰华,杨军,王福新,等.无氰镀镉工艺开发研究与应用[J]. 电镀与精饰,2014,36(3):22-25+46.
Wan B H, Yang J, Wang F X, et al. Investigation and application on cyanide-free cadmium electroplating technology [J]. Plating & Finishing, 2014, 36(3): 22-25+46 (in Chinese).
[4] 黄勇,杜楠,沈宗耀,等.乙内酰脲体系无氰电镀镉工艺[J]. 表面技术,2019,48(2):239-245.
Huang Y, Du N, Shen Z Y, et al. Cyanide free cadmium plating process for hydantoin system [J]. Surface Technology, 2019, 48(2): 239-245 (in Chinese).
相似文献/References:
[1]刘 玮,安成强*,郝建军,等.钼酸钠对AZ91D镁合金钒/锆复合转化膜性能的影响[J].电镀与精饰,2019,(8):10.[doi:10.3969/j.issn.1001-3849.2019.08.003]
LIU Wei,AN Chengqiang*,HAO Jianjun,et al.Effect of Na2MoO4 on Properties of Vanadium/Zirconate Conversion Coating on AZ91D Magnesium Alloy[J].Plating & Finishing,2019,(8):10.[doi:10.3969/j.issn.1001-3849.2019.08.003]
[2]徐振邦,陆振涛,柯喜敏,等.铝合金电子元器件的表面涂层与耐蚀性能研究[J].电镀与精饰,2019,(10):9.[doi:10.3969/j.issn.1001-3849.2019.10.003]
XU Zhenbang,LU Zhentao,KE Ximin,et al.Study on Surface Coating and Corrosion Resistance of Aluminum Alloy Electronic Components[J].Plating & Finishing,2019,(8):9.[doi:10.3969/j.issn.1001-3849.2019.10.003]
[3]周苗淼,张 雨,沈喜训,等.芯片电镀铜添加剂的研究进展[J].电镀与精饰,2022,(2):60.[doi:10.3969/j.issn.1001-3849.2022.02.013]
ZHOU Miaomiao,ZHANG Yu,SHEN Xixun,et al.Research Progress of the Copper Electroplating Additives in Chip Manufacturing[J].Plating & Finishing,2022,(8):60.[doi:10.3969/j.issn.1001-3849.2022.02.013]
[4]邱 媛*,元 泉,杨志业,等.添加剂对HEDP镀铜溶液性能的影响[J].电镀与精饰,2022,(5):33.[doi:10.3969/j.issn.1001-3849.2022.05.006]
QIU Yuan*,YUAN Quan,YANG Zhiye,et al.Effects of Additive on the Properties of HEDP Copper Plating Solution[J].Plating & Finishing,2022,(8):33.[doi:10.3969/j.issn.1001-3849.2022.05.006]
[5]朱金海*,蒋发正,王柯淇. 添加剂对建筑6063铝型材表面转化膜耐蚀性能的影响 [J].电镀与精饰,2022,(10):17.[doi:10.3969/j.issn.1001-3849.2022.10.003]
ZHU Jinhai*,JIANG Fazheng,WANG Keqi.Effect of Additives on Corrosion Resistance of Conversion Coating on 6063 Aluminum Profiles[J].Plating & Finishing,2022,(8):17.[doi:10.3969/j.issn.1001-3849.2022.10.003]
[6]向 静,阮海波*,王 翀,等.添加剂竞争吸附机理研究及通孔电镀应用[J].电镀与精饰,2022,(11):85.[doi:10.3969/j.issn.1001-3849.2022.11.015]
XIANG Jing,RUAN Haibo*,WANG Chong,et al.Study on Competitive Adsorption Mechanism of Additives and Its Application of Though Holes Plating[J].Plating & Finishing,2022,(8):85.[doi:10.3969/j.issn.1001-3849.2022.11.015]
[7]程庆,李宁,潘钦敏*,等.电解铜箔添加剂的研究进展及应用现状[J].电镀与精饰,2022,(12):69.[doi:10.3969/j.issn.1001-3849.2022.12.010]
CHENG Qing,LI Ning,PAN Qinmin*,et al.Research Progress and Application Status of Electrolytic Copper Foil Additives[J].Plating & Finishing,2022,(8):69.[doi:10.3969/j.issn.1001-3849.2022.12.010]
[8]代超熠,唐先忠,何 为,等.电解铜箔添加剂的研究进展[J].电镀与精饰,2024,(2):79.[doi:10.3969/j.issn.1001-3849.2024.02.011]
Tang Yao,hen Yuanming *.Research progress of electrolytic copper foil additives[J].Plating & Finishing,2024,(8):79.[doi:10.3969/j.issn.1001-3849.2024.02.011]
[9]张锦园,张 杰,白忠波,等.硫酸钛-钨酸钠复合添加剂对电解铜箔后处理形貌及抗剥离强度的影响[J].电镀与精饰,2024,(5):101.[doi:10.3969/j.issn.1001-3849.2024.05.014]
Zhang Jinyuan,Zhang Jie,Bai Zhongbo,et al.Effect of titanium sulfate and sodium tungstate composite additive on morphology and performance of electrolytic copper foil posttreatment?/html>[J].Plating & Finishing,2024,(8):101.[doi:10.3969/j.issn.1001-3849.2024.05.014]
备注/Memo
收稿日期： 2019-11-14；修回日期： 2020-01-27
作者简介： 张玉清，Email：1303592883@qq.com
*通信作者： 陈同彩（1964—），男，硕士，高级工程师，主要研究方向为为材料科学，Email：71370740@qq.com