HU Yugang,CHEN Yan*,YANG Dapeng,et al.Study on Magnetic Abrasive Machining of PVD Coated Stepped Rod[J].Plating & Finishing,2020,(2):20-25.[doi:10.3969/j.issn.1001-3849.2020.02.005]
PVD涂层阶梯杆的磁粒研磨加工研究
- Title:
- Study on Magnetic Abrasive Machining of PVD Coated Stepped Rod
- 文献标志码:
- A
- 摘要:
- 为了改善PVD (Physical Vapor Deposition)涂层阶梯杆的表面质量，实验中采用磁粒研磨的方法对阶梯杆进行磨削加工，并对实验参数进行优化，得出最佳磨削加工参数。结果表明，优化后的实验参数为：磁性磨粒的粒径大小为250 μm，车床主轴转速为750 r/min，加工间隙为3 mm。用优化后的参数对阶梯杆进行磨削加工40 min，阶梯杆表面粗糙度从原始的Ra 1.35 μm降低到Ra 0.26 μm，阶梯杆表面光洁度有明显提高。
- Abstract:
- In order to improve the surface quality of the step rod coated with PVD (Physical Vapor Deposition), the magnetic abrasive finishing was used to grind the step rod in the experiment, and the experimental parameters were optimized to obtain the optimal grinding parameters. The results showed that the optimized experimental parameters were as follows: the particle size of magnetic abrasive particles was 250 ?m, the spindle speed of lathe was 750 r/min, and the machining gap was 3 mm. After the optimized parameters were used to grind the step rod for 40 min, the surface roughness of the step rod was reduced from Ra 1.35 ?m to Ra 0.26 ?m, and the surface finish of the stepped rod was obviously improved.
参考文献/References:
[1] 范庆生, 柳锡庆. 活塞裙部外圆表面微观结构对其使用性能的影响[J]. 山东内燃机, 2002, 01: 34 -35.
[2] 张海洲, 崔立春, 刘迪祥, 等. 复合PVD涂层在冲压模具上的研究及应用[J]. 锻压装备与制造技术,2018, (06): 107 - 109.
[3] 沈阳, 刘海青, 成明, 等. 物理气相沉积在镁合金表面防护领域的研究现状[J]. 材料保护, 2019, 52(01): 102 - 106.
[4] 李邵辉. 模具PVD涂层工艺应用中的问题分析[J]. 南方农机,2017, 48(04): 87.
[5] 杨海吉,张晓君,陈燕,等.磁力研磨精密抛光?4×150 mm TC4管内表面的实验研究[J]. 表面技术,2017, 46(12): 259- 264.
[6] 潘晶, 刘新才, 徐志锋, 等. 30CrMnSiA钢管外圆磁力研磨工艺的研究[J]. 机械工艺师, 2001, 01: 31.
[7] 吴昊, 张桂香, 陈春增. 磁力研磨加工718模具钢表面质量和形貌试验研究[J]. 制造技术与机床, 2014, 06: 75-78.
[8] 张龙龙, 焦安源, 陈燕, 等. 磁粒复合研磨SUS304不锈钢孔道的机理与试验研究[J]. 表面技术,2018, 47(11): 259-266.
相似文献/References:
[1]许召宽,韩 冰,陈 燕,等.基于电解-磁力复合研磨法的表面光整加工[J].电镀与精饰,2018,(12):7.[doi:10.3969/j.issn.1001?3849.2018.12.002]
XU Zhaokuan,HAN Bing,CHEN Yan,et al.Surface Finishing Based on Electrolysis-Magnetic Force Composite Grinding Method[J].Plating & Finishing,2018,(2):7.[doi:10.3969/j.issn.1001?3849.2018.12.002]
[2]刘冬冬,韩 冰,陈 燕,等.GCr15轴承内圈磁粒研磨光整实验[J].电镀与精饰,2019,(7):1.[doi:10.3969/j.issn.1001-3849.2019.07.001]
LIU Dongdong,HAN Bing,CHEN Yan,et al.Experimental Study on GCr15 Bearing Inner Ring Magnetite Grinding and Finishing[J].Plating & Finishing,2019,(2):1.[doi:10.3969/j.issn.1001-3849.2019.07.001]
[3]刘冬冬,朱子俊,李 逵,等.石英玻璃管磁粒研磨机理与光整试验研究[J].电镀与精饰,2019,(9):18.[doi:10.3969/j.issn.1001-3849.2019.09.004]
LIU Dongdong,ZHU Zijun,LI Kui,et al.Research on Magnetite Grinding Mechanism and Finishing Test of Quartz Glass Tube[J].Plating & Finishing,2019,(2):18.[doi:10.3969/j.issn.1001-3849.2019.09.004]
[4]刘新龙,陈 燕,张国富,等.电解-旋转超声磁粒复合对Tc4板抛光的研究[J].电镀与精饰,2019,(10):13.[doi:10.3969/j.issn.1001-3849.2019.10.004]
LIU Xinlong,CHEN Yan,ZHANG Guofu,et al.Study on Polishing of Tc4 Plate by Electrolysis-Rotating Ultrasound Magnetic Particle Composite[J].Plating & Finishing,2019,(2):13.[doi:10.3969/j.issn.1001-3849.2019.10.004]
[5]刘冬冬,韩 冰*,陈 燕,等.超声磁粒研磨Al 6061管内表面光整试验研究[J].电镀与精饰,2019,(12):14.[doi:10.3969/j.issn.1001-3849.2019.12.004]
LIU Dongdong,HAN Bing*,CHEN Yan,et al.Research on Application of Magnetic Abrasive Particle Aided Magnetic Needles Grinding[J].Plating & Finishing,2019,(2):14.[doi:10.3969/j.issn.1001-3849.2019.12.004]
[6]张 金*,刘玉岭,闫辰奇.氧化剂对铝栅化学机械抛光的影响[J].电镀与精饰,2020,(1):18.[doi:10.3969/j.issn.1001-3849.2020.01.004]
ZHANG Jin*,LIU Yuling,YAN Chenqi.Effect of Oxidant on Chemical Mechanical Polishing of Aluminium Grids[J].Plating & Finishing,2020,(2):18.[doi:10.3969/j.issn.1001-3849.2020.01.004]
[7]赵 杨,陈 燕*,程 淼,等.电磁场作用下球形磁极辅助研磨弯管内表面研究[J].电镀与精饰,2020,(1):22.[doi:10.3969/j.issn.1001-3849.2020.01.005]
ZHAO Yang,CHEN Yan*,CHENG Miao,et al.Study on the Inner Surface Finishing of Bend Pipe by Electromagnetic Fields Drive Spherical Magnetic Pole[J].Plating & Finishing,2020,(2):22.[doi:10.3969/j.issn.1001-3849.2020.01.005]
[8]谭 悦,陈 燕*.电解复合磁力研磨GH4169管内表面的光整研究[J].电镀与精饰,2020,(1):27.[doi:10.3969/j.issn.1001-3849.2020.01.006]
TAN Yue,CHEN Yan*.Surface Finishing of GH4169 Tube by Electrolytic Composite Magnetic Grinding[J].Plating & Finishing,2020,(2):27.[doi:10.3969/j.issn.1001-3849.2020.01.006]
[9]王 杰,陈 燕*,吕旖旎,等.开槽仿形磁极在轴承内圈滚道光整中的应用[J].电镀与精饰,2020,(5):32.[doi:10.3969/j.issn.1001-3849.2020.05.0050]
WANG Jie,CHEN Yan*,LV Yini,et al.Application of Slotted Profiling Magnetic Pole in Bearing Inner Ring Groove Finishing[J].Plating & Finishing,2020,(2):32.[doi:10.3969/j.issn.1001-3849.2020.05.0050]
[10]朱子俊,韩 冰*,李 奎,等.超声辅助磁粒研磨TC4平面的光整试验研究[J].电镀与精饰,2020,(10):6.[doi:10.3969/j.issn.1001-3849.2020.10.0020]
ZHU Zijun,HAN Bing*,LI Kui,et al.Experimental Study on Ultrasonic-Assisted Magnetic Particle Grinding of TC4 Plane[J].Plating & Finishing,2020,(2):6.[doi:10.3969/j.issn.1001-3849.2020.10.0020]
[11]李佳新,曹 睿,矫彦婷,等.基于交变磁场辅助磁力研磨中永磁极优化试验[J].电镀与精饰,2024,(5):28.[doi:10.3969/j.issn.1001-3849.2024.05.004]
Li Jiaxin,Cao Rui,Jiao Yanting,et al.Optimization experiment of permanent magnetic pole in magnetic grinding assisted by alternating magnetic field[J].Plating & Finishing,2024,(2):28.[doi:10.3969/j.issn.1001-3849.2024.05.004]
[12]收稿日期： 0-0- 修回日期： 0-0-08.双轴式不定偏心法对提高磁粒研磨轨迹均匀性的研究[J].电镀与精饰,2024,(11):67.
Research on improving the uniformity of magnetic particle grinding trajectory by double axis indeterminate eccentricity method Ma Xiaogang 1 2* Wang Zijian 1 2 Li Houle 1 2 Wang Zezhi 1 2[J].Plating & Finishing,2024,(2):67.
备注/Memo
收稿日期： 2019-03-02；修回日期： 2019-07-28
作者简介： 胡玉刚（1993—）， 男， 硕士研究生， 主要研究方向为精密加工
通信作者： 陈燕， email： laochen412@gmail.com
基金项目： 辽宁省自然科学基金重点项目(20170540458)；精密与特种加工教育部重点实验室基金(B201703)；
辽宁省教育厅重点项目(2017LNZD02)