GUO Shaofu,ZHAO Chunhong*.Effect of Phytic Acid Sealing on Corrosion Resistance of Anodic Oxidation Film on Aluminum Parts[J].Plating & Finishing,2021,(8):6-10.[doi:10.3969/j.issn.1001-3849.2021.08.002]
植酸封孔对铝制件阳极氧化膜耐蚀性的影响
- Title:
- Effect of Phytic Acid Sealing on Corrosion Resistance of Anodic Oxidation Film on Aluminum Parts
- Keywords:
- corrosion resistance anodic oxidation film phytic acid sealing solution temperature sealing time
- 文献标志码:
- A
- 摘要:
- 首先对铝制件进行阳极氧化,然后使用植酸进行封孔。研究了溶液温度和封孔时间对铝制件阳极氧化膜耐蚀性的影响,结果表明:随着溶液温度从50 ℃升至90 ℃,封孔后阳极氧化膜的电荷转移电阻从1.61×104 Ω·cm2提高到3.25×104 Ω·cm2,高频阻抗模值从2.42×104 Ω·cm2增大到5.16×104 Ω·cm2,耐蚀性逐步提高。随着封孔时间从4 min延长至24 min,封孔后阳极氧化膜的电荷转移电阻先提高后降低,高频阻抗模值先增大后减小。植酸封孔最佳的溶液温度为90 ℃,封孔时间为18 min。封孔后阳极氧化膜的元素组成与未封孔阳极氧化膜相同,但形貌明显不同。与未封孔阳极氧化膜相比,封孔后阳极氧化膜具有良好的腐蚀耐久性,能为铝制件提供较长久的防护。
- Abstract:
- The aluminum part was anodized and then sealed with phytic acid, and the effect of solution temperature and sealing time on the corrosion resistance of anodic oxidation film was studied. The results showed that as the solution temperature rised from 50 ℃ to 90 ℃, the charge transfer resistance of the sealed anodic oxidation film increased from 1.61×104 Ω·cm2 to 3.25×104 Ω·cm2, and the high-frequency impedance modulus value increased from 2.42×104 Ω·cm2 to 5.16×104 Ω·cm2, indicating that the corrosion resistance of sealed anodic oxidation film was gradually improved. As the sealing time extended from 4 min to 24 min, the charge transfer resistance and high-frequency impedance modulus of the sealed anodic oxidation film both increased first and then decreased. The optimal solution temperature for phytic acid sealing was 90 ℃, and the sealing time was 18 min. The element composition of the sealed anodic oxidation film was the same as that of the unsealed anodic oxidation film, but the morphology was obviously different. Compared with the unsealed anodic oxidation film, the sealed anodic oxidation film has better corrosion durability and can provide longer protection for aluminum parts.
参考文献/References:
[1] 孙晓麟, 赵霞, 金祖权, 等. 草酸阳极氧化法制备铝合金氧化膜及其防腐蚀性能[J]. 材料保护, 2018, 51(2): 5-8.
Sun X L,Zhao X,Jin Z Q,et al. Anticorrosion properties of aluminum oxide films prepared by anodic oxidation in oxalic acid electrolyte[J]. Materials Protection,2018,51(2):5-8 (in Chinese).
[2] 肖金涛,陈妍,邢明秀,等. 工艺参数对2195铝锂合金阳极氧化膜的耐蚀性影响[J]. 中国腐蚀与防护学报,2019,39(5):431-438.
Xiao J T, Chen Y, Xing M X, et al. Effect of process parameters on corrosion resistance of anodizing film on 2195 Al-Li alloy [J]. Journal of Chinese Society for Corrosion and Protection, 2019, 39(5): 431-438 (in Chinese).
[3] Zhang D Y, Dong G N, Chen Y J, et al. Electrophoretic deposition of PTFE particles on porous anodic aluminum oxide film and its tribological properties[J]. Applied Surface Science, 2014, 290, 466-474.
[4] Zaraska L, Gawlak K, Gurgul M, et al. Influence of anodizing conditions on generation of internal cracks in anodic porous tin oxide films grown in NaOH electrolyte[J]. Applied Surface Science, 2018, 439, 672-680.
[5] 王雨顺,丁毅,马立群,等. 铝及铝合金阳极氧化膜的封孔工艺研究进展[J]. 表面技术,2010, 39(4): 87-90.
Wang Y S, Ding Yi, Ma L Q, et al. Development of sealing technology of anodized aluminum and aluminum alloys[J]. Surface Technology, 2010, 39(4): 87-90 (in Chinese).
[6] Li Y D, Zhao P Z, Feng Y J, et al. Influence of anodic oxide film structure on adhesive bonding performance of 5754 aluminum alloy[J]. Transactions of Nonferrous Metals Society of China, 2019, 29(9): 1836-1841.
[7] 任鑫,初鑫. 常温镍盐封闭处理对铝阳极氧化膜性能的影响[J]. 表面技术, 2010, 39(2):74-76.
Ren X,Chu X. The Influence of sealing treatment with salt containing Ni2+ at normal temperature on properties of anodized aluminum alloy[J]. Surface Technology,2010, 39(2): 74-76 (in Chinese).
[8] Wan Y. Study on anodic oxidation and sealing of aluminum alloy[J]. International Journal of Electrochemical,2018, 13(2): 2175-2185.
[9] 黄百昌,芦佳明,曾邱,等. 铝合金阳极氧化封孔工艺研究[J]. 江西化工, 2017, 3, 67-69.
Huang B C, Lu J M, Zeng Q, et al. Study on anodic oxidation sealing technology of aluminum alloy [J]. Jiangxi Chemical Industry, 2017, 3, 67-69 (in Chinese).
[10] 杨斌. 铝合金表面阳极氧化膜的制备、性能及应用研究[D]. 兰州:兰州理工大学, 2019.
[11] Sajjadnejad M, Omidvar H, Javanbakht M. Influence of pulse operational parameters on pure nickel electrodeposits: Part II. Microhardness and corrosion resistance[J]. Surface Engineering, 2017, 33(2): 94-101.
[12] 李晓孟,国秀花,张彦敏,等. 人工海水冲刷时间对B10管电化学性能影响的研究[J]. 材料研究与应用,2016,10(1):53-56.
Li X M,Guo X H,Zhang Y M,et al. Effects of erosion time on the electrochemical performance of B10 pipe in artificial seawater[J]. Materials Research and Application, 2016, 10(1): 53-56 (in Chinese).
[13] 卢勇,冯辉霞,张晓芳. 金属表面植酸转化膜研究进展[J]. 材料导报,2019, 33(9):1455-1461.
Lu Y, Feng H X, Zhang X F. An overview on study of phytic acid conversion coatings on metal surface[J]. Materials Review, 2019, 33(9): 1455-1461 (in Chinese).
[14] 曾纪勇,郭兴伍,郭嘉成,等. 镁合金表面新型高耐蚀性植酸化学转化膜的制备[J]. 表面技术,2019,48(10):230-237.
Zeng J Y, Guo X W, Guo J C, et al. Preparation of new phytic acid chemical conversion coating with excellent corrosion resistance on magnesium alloys[J]. Surface Technology, 2019, 48(10): 230-237 (in Chinese).
相似文献/References:
[1]宿 辉,栾柏瑞.AZ91D镁合金表面无铬无氟前处理工艺研究[J].电镀与精饰,2019,(1):10.[doi:10.3969/j.issn.1001-3849.2019.01.003]
XU Hui,LUAN Bairui.Study on Chromium?Free and Fluorine?Free PretreatmentProcess of AZ91D Magnesium Alloy[J].Plating & Finishing,2019,(8):10.[doi:10.3969/j.issn.1001-3849.2019.01.003]
[2]徐美玲,亢淑梅,陈婷婷,等.添加氯化铈对镁合金Ni?P化学镀镀层性能影响[J].电镀与精饰,2019,(1):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
XU Meiling,KANG Shumei,CHEN Tingting,et al.Properties of Electroless Plating Ni?P on Magnesium AlloySubstrate by Adding CeCl3[J].Plating & Finishing,2019,(8):37.[doi:10.3969/j.issn.1001-3849.2019.01.008]
[3]刘军松,刘定富,苏 琪,等.有机添加剂对电镀Zn-Ni-P合金的影响[J].电镀与精饰,2019,(7):6.[doi:10.3969/j.issn.1001-3849.2019.07.002]
LIU Junsong,LIU Dingfu,SU Qi,et al.Effect of Organic Additives on Zn-Ni-P Alloy Electroplating[J].Plating & Finishing,2019,(8):6.[doi:10.3969/j.issn.1001-3849.2019.07.002]
[4]颜晨曦,宋娟娟,曹建平,等.全氢聚硅氮烷涂层制备及其性能[J].电镀与精饰,2019,(7):14.[doi:10.3969/j.issn.1001-3849.2019.07.004]
YAN Chenxi,SONG Juanjuan,CAO Jianping,et al.Preparation and Properties of Perhydropolysilazane Coating[J].Plating & Finishing,2019,(8):14.[doi:10.3969/j.issn.1001-3849.2019.07.004]
[5]姚知深,牛宗伟*,刘 斌,等.超声振动对65钢电解磷化膜表面形貌与耐蚀性的影响[J].电镀与精饰,2019,(9):24.[doi:10.3969/j.issn.1001-3849.2019.09.005]
YAO Zhishen,NIU Zongwei*,LIU Bin,et al.Effect of Ultrasonic Vibration on Surface Morphology and Corrosion Resistance of 65 Steel Electrolytic Phosphating Film[J].Plating & Finishing,2019,(8):24.[doi:10.3969/j.issn.1001-3849.2019.09.005]
[6]李佳霖,郝建军,牟世辉.Fe2+对镁合金电化学磷化改性研究[J].电镀与精饰,2019,(10):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
LI Jialin,HAO Jianjun,MOU Shihui.Study on Electrochemical Phosphating Modification of Magnesium Alloy by Fe2+[J].Plating & Finishing,2019,(8):1.[doi:10.3969/j.issn.1001-3849.2019.10.001]
[7]雷同鑫,鞠 辉,张长科,等.电镀Ni-W-P合金在钻杆接头上的应用[J].电镀与精饰,2019,(10):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
LEI Tongxin,JU Hui,ZHANG Changke,et al.Application of Ni-W-P Alloy Prepared by Electroplating to Tool Joints[J].Plating & Finishing,2019,(8):38.[doi:10.3969/j.issn.1001-3849.2019.10.009]
[8]贾启华,许晓娟*.沉积时间对镁合金化学镀镍的影响[J].电镀与精饰,2019,(12):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
JIA Qihua,XU Xiaojuan*.Effect of Deposition Time on Direct Electroless Plating of Magnesium Alloys[J].Plating & Finishing,2019,(8):1.[doi:10.3969/j.issn.1001-3849.2019.12.001]
[9]李 博*,赵金航,肖细军.电镀锌-镍合金替代镀镉、镀镉-钛工艺研究[J].电镀与精饰,2020,(3):43.[doi:10.3969/j.issn.1001-3849.2020.03.009]
LI Bo*,ZHAO Jinhang,XIAO Xijun.Process Research on Electroplating of Zinc-Nickel Alloy Instead of Cadmium Plating and Cadmium-Titanium Plating[J].Plating & Finishing,2020,(8):43.[doi:10.3969/j.issn.1001-3849.2020.03.009]
[10]黄章崎,石海明,朱惠文,等.可溶性镍阳极对电镀镍性能的影响[J].电镀与精饰,2020,(6):1.[doi:10.3969/j.issn.1001-3849.2020.06.0010]
HUANG Zhangqi,SHI Haiming,ZHU Huiwen,et al.Effect of Soluble Nickel Anode on the Performance of Electroplated Nickel[J].Plating & Finishing,2020,(8):1.[doi:10.3969/j.issn.1001-3849.2020.06.0010]
[11]成张佳宁,黄坤坤.纳米La2O3颗粒对建筑铝合金表面阳极氧化膜性能的影响[J].电镀与精饰,2023,(2):20.[doi:10.3969/j.issn.1001-3849.2023.02.004]
Cheng Zhangjianing ? Huang Kunkun.Influence of nano-La 2 O 3 particles on performance of anodic oxide films on aluminum alloy for construction[J].Plating & Finishing,2023,(8):20.[doi:10.3969/j.issn.1001-3849.2023.02.004]
[12]费强*,金标,张彤,等.锂电池铝合金散热片阳极氧化及耐蚀性研究[J].电镀与精饰,2023,(9):6.[doi:10.3969/j.issn.1001-3849.2023.09.002]
Fei Qiang * Jin Biao Zhang Tong Yan Lijing Zhang Heli.Anodic oxidation and corrosion resistance of aluminum alloy heat sink for lithium battery[J].Plating & Finishing,2023,(8):6.[doi:10.3969/j.issn.1001-3849.2023.09.002]
备注/Memo
收稿日期: 2020-12-26;修回日期: 2021-01-21
*通信作者: 赵春红(1985—),女,硕士,讲师,主要研究方向:计算化学、电化学等,E-mail:teacher_guo0500@126.com
基金项目: 河北省自然科学