ZHANG Bo,LI Jinhua,ZHOU Baoxue*,et al.Resource Recovery and Utilization of Nickel Plating Wastewater[J].Plating & Finishing,2021,(10):46-50.[doi:10.3969/j.issn.1001-3849.2021.10.009]
镀镍废水的资源化回收利用
- Title:
- Resource Recovery and Utilization of Nickel Plating Wastewater
- 文献标志码:
- A
- 摘要:
- 针对电镀行业含镍废水达标排放的迫切需求，以常规电镀镍、化学镀镍、锌镍合金镀镍三种典型工艺产生的废水为对象，对含镍废水回收利用的难点和技术特点进行了总结。实现镍离子和水在电镀工艺上的回用或资源化，对于含镍废水污染的控制具有重要意义。
- Abstract:
- In order to meet the urgent demand of nickel wastewater discharge in electroplating industry, the difficulties and technical characteristics of nickel wastewater recovery and utilization were summarized by taking the wastewater produced by conventional nickel plating, chemical nickel plating and zinc-nickel alloy nickel plating as the example. It is of great significance for in-situ recycle or resource utilization of nickel ions and water in the electroplating production line for the control of nickel wastewater pollution.
参考文献/References:
[1] 符华燕. 化学镀镍技术在电子工业中的应用[J]. 通讯世界, 2015, 10: 232.
Fu H Y. Application of electroless nickel plating technology in electronic industry [J]. Telecom World, 2015, 10: 232 (in Chinese).
[2] 朱增伟, 刘亚鹏, 胡军臣, 等. 航天制造中的电铸技术[J]. 电加工与模具, 2019, 1: 1-7.
Zhu Z W, Liu Y P, Hu J C, et al. Applications of electroforming technology in the aerospace manufacturing [J]. Electromachining and Mould, 2019, (1): 1-7 (in Chinese).
[3] 涂满钰. 低应力氨基磺酸镀镍在航空维修中的应用[J]. 材料保护, 2019, 52(3): 123-126+133.
Tu M Y. Application of low internal stress amino-sulfonate nickel plating in aviation maintenance [J]. Materials Protection, 2019, 52(3): 123-126+133 (in Chinese).
[4] 康立娟. 镍与人体健康及毒理作用[C]//中国微量元素科学研究会.中国微量元素科学研究会第十三届学术研讨会论文集(二).香港:香港新闻出版社, 2006: 43-46.
[5] 刘刚. 镀镍废水处理技术的研究[D]. 西安: 陕西科技大学, 2013.
[6] 高丽娟. 离子交换工艺处理电镀镍废水的性能研究[D]. 哈尔滨:哈尔滨工业大学, 2016.
[7] 高丽娟, 赵庆良, 王广智, 等. 除镍离子交换树脂的优选及其效能的研究[J]. 工业用水与废水, 2016, 47(4): 58-63.
Gao L J, Zhao Q L, Wang G Z, et al. Research on optimization and efficiency of ion exchange resin for Ni2+ removal [J]. Industrial Water and Wastewater, 2016, 47(4): 58-63 (in Chinese).
[8] 付丹, 程象. 电镀含镍废水现场回收技术[J]. 电镀与精饰, 2018, 40(1): 22-26.
Fu D, Cheng X. On-site recovery technology of nickel containing electroplating wastewater [J]. Plating and Finishing, 2018, 40 (1): 22-26 (in Chinese).
[9] 付丹. 镀镍漂白废液回用的研究[J]. 电镀与环保, 2011, 31(1): 41-43.
Fu D. A research on reusing the spent bleaching liquor of nickel plating [J]. Electroplating and Pollution Control, 2011, 31(1): 41-43 (in Chinese).
[10] 王文丰. 螯合沉淀法处理电镀废水的工业实践[J]. 环境污染治理技术与设备, 2005, 9: 83-85.
Wang W F. An industrial practice of chelating precipitation to treat electroplating wastewater [J]. Techniques and Equipment for Environmental Pollution Control, 2005, 9: 83-85 (in Chinese).
[11] 周盛兵, 芦昱. 含镍污泥的处理技术研究[J]. 河南科技, 2016, 3: 137-139.
Zhou S B, Lu Y. Research on nickel sludge treatment technology [J]. Henan Science & Technology, 2016, 3: 137-139 (in Chinese).
[12] 张文超, 李殿秀, 李晓娟, 等. 含镍污泥中镍的分离与提纯研究[J]. 河南科学, 2016, 34(10): 1696-1698.
Zhang W C, Li D X, Li X J, et al. Separation and purification of nickel in the nickel sludge [J]. Henan Science, 2016, 34(10): 1696-1698 (in Chinese).
[13] Benvenuti T, Krapf R S, Rodrigues M A S, et al. Recovery of nickel and water from nickel electroplating wastewater by electrodialysis[J]. Separation and Purification Technology, 2014, 129: 106-112.
[14] Bouhidel K E, Rumeau M. Ion-exchange membrane fouling by boric acid in the electrodialysis of nickel electroplating rinsing waters: generalization of our results[J]. Desalination, 2004, 167: 301-310.
[15] Scarazzato T, Panossian Z, Tenório J A S, et al. A review of cleaner production in electroplating industries using electrodialysis[J]. Journal of Cleaner Production, 2017, 168: 1590-1602.
[16] Lu H X, Wang Y Z, Wang J Y. Recovery of Ni2+ and pure water from electroplating rinse wastewater by an integrated two-stage electrodeionization process[J]. Journal of Cleaner Production, 2015, 92: 257-266.
[17] Sulaiman R N R, Othman N. Synergistic green extraction of nickel ions from electroplating waste via mixtures of chelating and organophosphorus carrier[J]. Journal of Hazardous Materials, 2017, 340: 77-84.
[18] Tahir A, Shehzadi R, Mateen B, et al. Biosorption of nickel (II) from effluent of electroplating industry by immobilized cells of bacillus species[J]. Engineering in Life Sciences, 2009, 9(6): 462-467.
[19] 张学俊, 曾坚贤, 张鹏, 等. 化学沉淀-微滤-络合-超滤处理高浓度含镍废水[J]. 中国环境科学, 2016, 36(4): 1106-1111.
Zhang X J, Zeng J X, Zhang P, et al. Treatment of wastewater containing high concentration nickel ions with precipitation-microfiltration-complexation-ultrafiltration processes [J]. China Environmental Science, 2016, 36(4): 1106-1111 (in Chinese).
[20] 刘智颖. 还原性铁粉处理化学镀镍漂洗废水研究[D]. 广州: 华南理工大学, 2016.
[21] 张笠. 化学镀镍废液用树脂法再生的研究[C]//天津市电镀工程学会.天津市电镀工程学会第八届学术年会论文集. 天津: 天津市电镀工程学会, 1998: 38-41.
[22] 陈健荣, 崔国峰. 化学镀镍废液处理的现状及展望[J]. 电镀与环保, 2007, (4): 4-8.
Chen J R, Cui G F. Status and prospect of the methods for treating spent electroless nickel plating baths [J]. Electroplating and Pollution Control, 2007, (4): 4-8 (in Chinese).
[23] 韦蒙蒙, 刘福强, 赵伟,等. D463树脂对废水中镍-氨络合离子的吸附性能与机理研究[J]. 离子交换与吸附, 2016, 32(6): 555-567.
Wei M M, Liu F Q, Zhao W, et al. Removal of complex of Ni(II)-ammonia from the wastewater by D463 and the mechanism insight [J]. Ion Exchange and Adsorption, 2016, 32(6): 555-567 (in Chinese).
[24] 李姣. 化学沉淀法处理电镀废水的实验研究[D]. 长沙:湖南大学, 2011.
[25] 唐益洲. 三维电催化氧化处理柠檬酸络合镍废水的研究[D]. 长沙:湖南师范大学, 2017.
[26] 李洋, 陈忠平, 孙萌萌, 等. 化学镀镍废水中磷和镍的同步去除[J]. 环境工程学报, 2020, 14(1): 96-102.
Li Y, Chen Z P, Sun M M, et al. Simultaneous removal of phosphorus and nickel from electroless nickel plating wastewater [J]. Chinese Journal of Environmental Engineering, 2020, 14(1): 96-102 (in Chinese).
[27] 郭苏湘. 化学镀镍废液的资源回收与处理[J]. 民营科技, 2014, (8): 28.
Guo S X. Resource recovery and treatment of spent electroless nickel plating solution [J]. Min Ying Ke Ji, 2014, (8): 28 (in Chinese).
[28] 吴志宇, 黎建平, 王怡璇, 等. 电解-催化还原法回收化学镀镍废液中的镍[J]. 电镀与环保, 2019, 39(2): 55-58.
Wu Z Y, Li J P, Wang Y X, et al. Recovery of nickel from electroless nickel plating wastewater by electrolysis-catalytic reduction method [J]. Electroplating ＆ Pollution Control, 2019, 39 (2): 55-58 (in Chinese).
[29] 吴思国, 王丹丹, 芦嵩林, 等. 用水合肼还原法从化学镀镍废液中回收镍[J]. 电镀与精饰, 2012, 34(12): 42-46.
Wu S G, Wang D D, Lu S L, et al. Researches on the recycling of nickel from spent electroless nickel plating baths by hydrazine reduction [J]. Electroplating and Finishing, 2012, 34(12): 42-46 (in Chinese).
[30] 贺框, 杜建伟, 马英, 等. 膜分离技术在化学镀镍清洗水回用中的应用[J]. 电镀与涂饰, 2017, 36(11): 587-593.
He K, Du J W, Ma Y, et al. Application of membrane separation technique in reclamation of rinsing water discharged from electroless nickel plating production [J]. Plating and Finishing, 2017, 36(11): 587-593 (in Chinese).
[31] 赖奂汶, 丁汀, 黄清安. 无氰碱性锌镍合金电镀中配位剂的选择[J]. 电镀与涂饰, 2008, (1): 5-6.
Lai H W, Ding D, Huang Q A. Selection of complexing agents for cyanide-free alkaline zinc-nickel alloy electroplating [J]. Electroplating and Finishing, 2008, (1): 5-6 (in Chinese).
[32] 李金成, 郭海丽, 雷铠玮,等. UV/H2O2预氧化处理锌镍合金电镀废水的研究[J]. 工业水处理, 2016, 36(4): 54-57.
Li J C, Guo H L, Lei K W, et al. Study on UV/H2O2 pre-oxidation for treating zinc-nickel alloys electroplating wastewater [J]. Industrial Water Treatment, 2016, 36(4): 54-57 (in Chinese).
相似文献/References:
[1]王晓丽,顾 海,周昭昌,等.铜镀层工艺参数优化的正交实验研究[J].电镀与精饰,2018,(12):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
WANG Xiaoli,GU Hai,ZHOU Zhaochang,et al.Orthogonal Experimental Research on Optimization of Process Parameters of Copper Electroplating[J].Plating & Finishing,2018,(10):19.[doi:10.3969/j.issn.1001?3849.2018.12.005]
[2]王 秀.电镀智能监控系统设计[J].电镀与精饰,2018,(12):30.[doi:10.3969/j.issn.1001?3849.2018.12.007]
WANG Xiu.Design of Intelligent Electroplating Monitoring System[J].Plating & Finishing,2018,(10):30.[doi:10.3969/j.issn.1001?3849.2018.12.007]
[3]王明亮,杨海燕,李 明,等.电镀硬金的研究现状[J].电镀与精饰,2019,(11):26.[doi:10.3969/j.issn.1001-3849.2019.11.007]
WANG Mingliang,YANG Haiyan,LI Ming,et al.Research Progress on Hard Gold Electrodeposition[J].Plating & Finishing,2019,(10):26.[doi:10.3969/j.issn.1001-3849.2019.11.007]
[4]刘 光*,文 桦,徐启杰.基于TIA和PLC的全自动ABS塑料电镀控制系统设计[J].电镀与精饰,2020,(2):33.[doi:10.3969/j.issn.1001-3849.2020.02.007]
LIU Guang*,WEN Hua,XU Qijie.Design of Automatic Control System for ABS Plastics Electroplating Line Based on TIA and PLC[J].Plating & Finishing,2020,(10):33.[doi:10.3969/j.issn.1001-3849.2020.02.007]
[5]宋青员,何荣祥,陈朝会,等.高度梯度微纳结构的自动化电镀制备方法[J].电镀与精饰,2020,(7):23.[doi:10.3969/j.issn.1001-3849.2020.07.0050]
SONG Qingyuan,HE Rongxiang,CHEN Chaohui,et al.Automated Electroplating for Gradient Height Micro-nano Structures Fabricating[J].Plating & Finishing,2020,(10):23.[doi:10.3969/j.issn.1001-3849.2020.07.0050]
[6]雷翔霄?,徐立娟,唐春霞.基于神经网络PID算法的镀液温度控制系统[J].电镀与精饰,2020,(8):39.[doi:10.3969/j.issn.1001-3849.2020.08.0080]
LEI Xiangxiao,XU Lijuan,et al.Bath Temperature Control System Based on Neural Network PID[J].Plating & Finishing,2020,(10):39.[doi:10.3969/j.issn.1001-3849.2020.08.0080]
[7]范文俊,崔红兵,王 萌,等.从三价铬溶液电沉积非晶Cr-C镀层及其性能研究[J].电镀与精饰,2020,(12):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
FAN Wenjun,CUI Hongbing,WANG Meng,et al.Preparation and Performance Study of Amorphous Cr-C Coating Electrodeposited from Trivalent Chromium Solution[J].Plating & Finishing,2020,(10):37.[doi:10.3969/j.issn.1001-3849.2020.12.0080]
[8]薛迪杰*,陈 军,陈景召.基于ZigBee的电镀生产线温度集中监控系统[J].电镀与精饰,2021,(1):31.[doi:10.3969/j.issn.1001-3849.2021.01.0060]
XUE Dijie*,CHEN Jun,CHEN Jingzhao,et al.Temperature Centralized Monitoring System of Electroplating Production Line Based on ZigBee[J].Plating & Finishing,2021,(10):31.[doi:10.3969/j.issn.1001-3849.2021.01.0060]
[9]王昱开*.不锈钢工具电镀金刚石工艺研究[J].电镀与精饰,2021,(3):6.[doi:10.3969/j.issn.1001-3849.2021.03.002]
WANG Yukai*.王昱开*[J].Plating & Finishing,2021,(10):6.[doi:10.3969/j.issn.1001-3849.2021.03.002]
[10]杨航城,田海燕.工艺参数对电镀镍钴合金及其性能的影响[J].电镀与精饰,2021,(4):5.[doi:10.3969/j.issn.1001-3849.2021.04.002]
YANG Hangcheng,TIAN Haiyan.Effect of Process Parameters on Electrodepositing Ni-Co Alloy and Its Properties[J].Plating & Finishing,2021,(10):5.[doi:10.3969/j.issn.1001-3849.2021.04.002]
备注/Memo
收稿日期： 2020-06-22；修回日期： 2020-09-07
作者简介： 张博（1997—），男，硕士研究生，email：zhangb229@sjtu.edu.cn
通信作者： 周保学，email：zhoubaoxue@sjtu.edu.cn
基金项目： 上海市科学技术委员会项目（2023240500， 19DZ1208300）