LIU Ruixia*,ZHU Fudong,YOU Guoyan.刘瑞霞*，朱福栋，由国艳[J].Plating & Finishing,2021,(2):11-15.[doi:10.3969/j.issn.1001-3849.2021.02.0030]
等离子体增强的磁控溅射TiSiN薄膜结构与耐蚀性
- Title:
- 刘瑞霞*，朱福栋，由国艳
- 文献标志码:
- A
- 摘要:
- 针对磁控溅射固有磁场强度随时间衰减的问题，采用外加磁场增强真空室内等离子密度的方法，在AZ31基体上反应溅射沉积了厚度约2 μm的TiSiN薄膜。应用XRD、SEM研究了等离子体增强的磁控溅射方法所制备薄膜的物相组成、结构、表面形貌，利用电化学工作站研究了等离子体增强的磁控溅射薄膜在3.5 %NaCl溶液中的腐蚀行为，并与未增强等离子体制备的薄膜做了对比。结果表明：等离子体增强后，薄膜的择优取向发生改变，薄膜致密度更高，薄膜表面粗糙度、缺陷以及晶粒尺寸有所减小，且薄膜在NaCl溶液中的抗腐蚀能力更好，等离子体增强技术对于提高薄膜质量和性能效果显著。
- Abstract:
- In order to solve the problem of the inherent magnetic field intensity decreasing with time in the application of magnetron sputtering, TiSiN films with a thickness of about 2 μm were deposited on AZ31 substrates by reactive sputtering using the method of external magnetic field to enhance the plasma density in a vacuum chamber. XRD and SEM were used to characterize the phase composition, structure and surface morphology of the thin films prepared by plasma-enhanced magnetron sputtering method, and electrochemical workstation was used to study the corrosion behavior of the obtained films in 3.5 % NaCl solution. The comparison was made between the plasma enhanced films and unenhanced plasma films. The results showed that the plasma enhanced films could change the preferential orientation and the density was higher than the plasma unenhanced films. The surface roughness, defects and grain size of the plasma enhanced films were all reduced, and the corrosion resistance was also enhanced. The plasma enhancement technique had a significant effect on improving the quality and performance of the thin films.
参考文献/References:
[1] Apelfeld A, Krit B, Ludin V, et al. The characterization of plasma electrolytic oxidation coatings on AZ41 magnesium alloy[J]. Surface ＆ Coating Technology, 2017, 322: 127-133.
[2] 丁文江, 付彭怀, 彭立明, 等. 先进镁合金材料及其在航空航天领域中的应用[J]. 航天器环境工程, 2011, 28(2): 103-110.
Ding W J, Fu P H, Peng L M, et al. Advanced magnesium alloys and their applications in aerospace[J]. Spacecraft Environment Engineering, 2011, 28(2): 103-110 (in Chinese).
[3] Wang X J, Xu D K, Wu R Z, et al. What is going on in magnesium alloys[J]. Journal of Materials Science ＆ Technology, 2018, 34: 245-247.
[4] Ji P, Long R Y, Hou L G, et al. Study on hydrophobicity and wettability transition of Ni-Cu-SiC coating on Mg-Li alloy[J]. Surface ＆ Coating Technology, 2018, 350: 428-435.
[5] Hoche H, Blawert C, Broszeit E, et al. Galvanic corrosion properties of differently PVD-treated magnesium die cast alloy AZ91[J]. Surface & Coatings Technology, 2005, 193: 223-229.
[6] Daroonparvar M, Yajid M A M, Bakhsheshi-Rad H R, et al. Corrosion resistance investigation of nanostructured Si and Si/TiO2-coated Mg alloy in 3.5 % NaCl solution[J]. Vacuum, 2014, 108: 61-65.
[7] 黄佳木, 罗先盛. AZ31镁合金表面磁控溅射SiNx薄膜的性能研究[J]. 材料导报, 2008, 12(32): 384-386.
Huang J M, Luo X S. Study on characteristics of SiNx thin films by magnetron sputering on AZ31 magnesium alloys[J]. Materials Review, 2008, 12(32): 384-386 (in Chinese).
[8] 管斌, 许俊华. TiSiN-Ag磁控溅射薄膜的微结构和性能[J]. 材料保护, 2018, 51(1): 1-4.
Guan B, Xu J H. Microstructure and properties of TiSiN-Ag films deposited by magnetron sputtering[J]. Materials Protection, 2018, 51(1): 1-4 (in Chinese).
[9] 曹慧, 张发, 孟超平. 钢表面纳米 TiAlN 薄膜的结构表征与性能研究[J]. 表面技术, 2016, 45(10): 108-113.
Cao H, Zhang F, Meng C P. Structural characteristics and performance of nano TiAlN film deposited on steels[J]. Surface Technology, 2016, 45(10): 108-113 (in Chinese).
[10] Sangeev K Sharma, Deuk Young Kim. Abnormal residual stress in nanostructured Al thin films grown on Ti/glass substrates[J]. Current Applied Physics, 2013, 13(9): 1874-1879.
[11] Zhang X, Xiao G Y, Jiang C C, et al. Influence of process parameters on microstructure and corrosion properties of hopeite coating on stainless steel[J]. Corrosion Science, 2015, 94: 428-437.
[12] 曹慧, 郭玉利, 韩晓雷. 不同负偏压下磁控溅射纳米TiAlN薄膜的微观结构与耐蚀性能[J]. 材料保护, 2018, 51(12): 18-22.
Cao H, Guo Y L, Han X L. Microstructure and corrosion resistance of nano TiAlN coatings[J]. Materials Protection, 2018, 51(12): 18-22 (in Chinese).
[13] 吴坤尧, 刘强, 鲁媛媛, 等. 磁控溅射制备Al2O3薄膜及耐蚀性能研究[J]. 功能材料, 2020, 51(2): 2209-2213.
Wu K Y, Liu Q, Lu Y Y, et al. Preparation of Al2O3 thin films by magnetron sputtering and its corrosion resistance[J]. Function Materials, 2020, 51(2): 2209-2213 (in Chinese).
[14] Shi Z M, Atrens A. An innovative specimen con?guration for the study of Mg corrosion[J]. Corrosion Science, 2011, 53: 226-246.
[15] 李沛, 钟庆东. 磁控溅射Al掺杂Al2O3薄膜耐蚀性能研究[J]. 材料导报, 2016, 30(S2): 141-145.
Li P, Zhong Q D. Study on the corrosion resistance of Al-doped Al203 thin films deposited by magnetron sputtering [J]. Materisls Review, 2016, 30(S2): 141-145 (in Chinese).
[16] Caicedo J C , Amaya C, Yate L, et al.. Effect of applied bias voltage on corrosion-resistance for TiC1-xNx and Ti1-xNbxC1-yNy coatings[J]. Applied Surface Science, 2010, 256: 2876-2883.
相似文献/References:
[1]王槐乾,姜宏伟,王方标,等.工艺参数对磁控溅射TiN膜结构的影响[J].电镀与精饰,2019,(12):20.[doi:10.3969/j.issn.1001-3849.2019.12.005]
WANG Huaiqian,JIANG Hongwei,WANG Fangbiao,et al.The Effect of Process Parameters on the Structure of Magnetron Sputtering TiN Films[J].Plating & Finishing,2019,(2):20.[doi:10.3969/j.issn.1001-3849.2019.12.005]
[2]刘 燕*,许彦伟,殷小健,等.紧固件真空镀铝层耐腐蚀性能评价[J].电镀与精饰,2020,(10):12.[doi:10.3969/j.issn.1001-3849.2020.10.0030]
LIU Yan*,XU Yanwei,YIN Xiaojian,et al.Corrosion Resistance of Aluminum Coatings on Fastener[J].Plating & Finishing,2020,(2):12.[doi:10.3969/j.issn.1001-3849.2020.10.0030]
[3]白睿,武英桐,李晓敏,等.真空退火温度对磁控溅射氧化钒薄膜结构和光学性能的影响[J].电镀与精饰,2020,(11):25.[doi:10.3969/j.issn.1001-3849.2020.11.0060]
BAI Rui,WU Yingtong,LI Xiaoming,et al.Influence of Vacuum Annealing Temperature on Structure and Optical Properties of the Vanadium Oxide Films by Magnetron Sputtering[J].Plating & Finishing,2020,(2):25.[doi:10.3969/j.issn.1001-3849.2020.11.0060]
[4]朱云龙,孙 芳*,姜宏伟,等.磁控溅射法制备纳米Cu薄膜及其微结构的研究[J].电镀与精饰,2022,(3):29.[doi:10.3969/j.issn.1001-3849.2022.03.006]
ZHU Yunlong,SUN Fang*,JIANG Hongwei,et al.Preparation and Microstructure of Cu Thin Films by Magnetron Sputtering[J].Plating & Finishing,2022,(2):29.[doi:10.3969/j.issn.1001-3849.2022.03.006]
[5]付保英*. 磁控溅射CrSiN涂层及其摩擦磨损性能研究 [J].电镀与精饰,2022,(7):36.[doi:10.3969/j.issn.1001-3849.2022.07.007]
FU Baoying *.Study on Friction and Wear Properties of CrSiN Coatings Deposited by Magnetron Sputtering[J].Plating & Finishing,2022,(2):36.[doi:10.3969/j.issn.1001-3849.2022.07.007]
[6]朱云龙,孙 芳*,姜宏伟.磁控溅射法制备Cu/ITO薄膜及其耐蚀性能研究[J].电镀与精饰,2023,(2):86.[doi:10.3969/j.issn.1001-3849.2023.02.014]
Zhu Yunlong,Sun Fang*,Jiang Hongwei.Preparation and corrosion resistance performance of magnetron sputtered Cu/ITO films[J].Plating & Finishing,2023,(2):86.[doi:10.3969/j.issn.1001-3849.2023.02.014]
[7]杨 岭,潘应君*,郑世恩,等.石墨表面磁控溅射钛膜的结构与工艺参数研究[J].电镀与精饰,2023,(3):11.[doi:10.3969/j.issn.1001-3849.2023.03.002]
Yang Ling,Pan Yingjun*,Zheng Shien,et al.Structure and process parameters of titanium films prepared by magnetron sputtering on graphite[J].Plating & Finishing,2023,(2):11.[doi:10.3969/j.issn.1001-3849.2023.03.002]
[8]刘永超 ?路亚娟,李润清,娄金刚,等.陶瓷表面金属化工艺研究[J].电镀与精饰,2023,(6):38.[doi:10.3969/j.issn.1001-3849.2023.06.006]
Liu Yongchao Lu Yajuan,Li Runqing,Lou Jingang,et al.Research on metallization process of ceramic surface?/html>[J].Plating & Finishing,2023,(2):38.[doi:10.3969/j.issn.1001-3849.2023.06.006]
[9]徐文慧,刘 杰,袁志响,等.磁控溅射法制备氧化锆涂层及其绝缘性能研究[J].电镀与精饰,2023,(7):68.[doi:10.3969/j.issn.1001-3849.2023.07.009]
Xu Wenhui,Liu Jie,Yuan Zhixiang,et al.Preparation and insulation properties of zirconia coating by magnetron sputtering[J].Plating & Finishing,2023,(2):68.[doi:10.3969/j.issn.1001-3849.2023.07.009]
[10]李兆营*,陈国雪.铝互连工艺中光刻胶残留原因及解决方法[J].电镀与精饰,2024,(10):96.
Li Zhaoying*,Chen Guoxue.Reasons and solutions for photoresist residual in aluminum interconnection process[J].Plating & Finishing,2024,(2):96.
备注/Memo
收稿日期： 2020-04-21；修回日期： 2020-06-30
作者简介： 刘瑞霞(1982—），女，研究生，讲师。email： 84952497@qq.com
基金项目： 内蒙古自治区教育厅项目(NJZY18314)